Sanyo PLC-HF10000L RS232 Expand - Page 41
Lamp Command, 8.1 CF_LAMPMODE Command, 8.2 CF_ LAMPCONSTTAR Command, 8.3 CF_AUTOLAMPCONTRL Command,
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
PLC-HF10000L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "2LAMP Set lamp mode to 2-lamps "1LAMPAUTO" ------ Set lamp mode to 1-lamp and automatically and preferentially use a lamp with shorter cumulated lighting time. %1 "1LAMP1 Set lamp mode to 1-lamp (LAMP1) "1LAMP2 Set lamp mode to 1-lamp (LAMP2) "CONSTANT" ------ Set lamp mode to Constant mode, and automatically switch between 2-Lamps mode and 1-Lamp mode, and/or modulate the light to keep the target brightness Details Select Lamp mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.2 CF_ LAMPCONSTTAR Command Command "CF_LAMPCONSTTAR_%1" [CR] %1 "0000" - "1024" Details Set Target value for Constant mode of Lamp mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.3 CF_AUTOLAMPCONTRL Command Command "CF_AUTOLAMPCONTRL_%1" [CR] "NORMAL Set Lamp status to Normal mode %1 "ECO1 Set Lamp status to Eco1 mode "ECO2 Set Lamp status to Eco2 mode "AUTO Set Lamp status to Auto mode Details Select Lamp control mode. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.4 CF_LAMPLIFECONTRL Command Command "CF_LAMPLIFECONTRL_%1" [CR] %1 "MODE1 Set Lamp life control mode to Mode1 "MODE2 Set Lamp life control mode to Mode2 Details Select Lamp life control. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 41/105