Sanyo PLC-HF10000L RS232 Expand - Page 85

CR_LAMPH Command, 9.11 CR_LAMPCORRESPH Command, 9.12 CR_LAMPINTERVAL Command, 9.13

Get Sanyo PLC-HF10000L - 10000 Lumens PDF manuals and user guides View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

PLC-HF10000L Expand Serial Command Functional Specifications 9.9.10 CR_LAMPH Command Command "CR_LAMPH" [CR] Details Get Lamp running time (in hours) * return actual lamp running time Acceptable "000_%1_%2_%3_%4" [CR] Lamp 1 data comes first, and then one space, after that lamp 2 data is followed. %1 = lamp No.1 %2 = lamp No.2 %3 = lamp No.3 %4 = lamp No.4 Response %1_%2 %3_%4 In the case of 2-lamps model, % 1 and % 2 are only used There are no % 3 and % 4 e.g.; "00410_00410_00410_00410" [CR Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Lamp No.3 = 410 Hours Lamp No.4 = 410 Hours Unacceptable "Error Code" [CR] 9.9.11 CR_LAMPCORRESPH Command Command "CR_LAMPCORRESPH" [CR] Details Get Lamp running time (in hours) *return lamp running time multiplied by a coefficient (not actual running time) Acceptable "000_%1" [CR] Response %1 "00000"-"99999" Unacceptable "Error Code" [CR] 9.9.12 CR_LAMPINTERVAL Command Command "CR_LAMPINTERVAL" [CR] Details Get setting status of Lamp interval Acceptable "000_%1" [CR] "0024 24 Hours is selected "0200 200 Hours is selected Response %1 "0500 500 Hours is selected "1000 1000 Hours is selected "2000 2000 Hours is selected "OFF Off is selected Unacceptable "?" [CR] 9.9.13 CR_LAMPLIFECONTRL Command Command "CR_LAMPLIFECONTRL" [CR] Details Get setting status of Lamp life control. (Available only in the normal Power ON status) Acceptable "000_%1" [CR] Response %1 "MODE1 Mode1 is selected "MODE2 Mode2 is selected Unacceptable "Error Code" [CR] 85/105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
PLC-HF10000L
Expand Serial Command Functional Specifications
85/105
9.9.10 CR_LAMPH Command
Command
“CR_LAMPH” [CR]
Details
Get Lamp running time (in hours)
* return actual lamp running time
Acceptable
“000_%1_%2_%3_%4” [CR]
%1_%2
%3_%4
Lamp 1 data comes first, and then one space, after that lamp 2
data is followed.
%1 = lamp No.1
%2 = lamp No.2
%3 = lamp No.3
%4 = lamp No.4
�
In the case of 2-lamps model, % 1 and % 2 are only used
�
There are no % 3 and % 4
�
e.g.; “00410_00410_00410_00410” [CR]
▪▪▪▪
→
Lamp No.1 = 410 Hours
Lamp No.2 = 410 Hours
Lamp No.3 = 410 Hours
Lamp No.4 = 410 Hours
Response
Unacceptable
“Error Code” [CR]
9.9.11 CR_LAMPCORRESPH Command
Command
“CR_LAMPCORRESPH” [CR]
Details
Get Lamp running time (in hours)
*return lamp running time multiplied by a coefficient (not actual running time)
Acceptable
“000_%1” [CR]
%1
“00000”-“99999”
Response
Unacceptable
“Error Code” [CR]
9.9.12 CR_LAMPINTERVAL Command
Command
“CR_LAMPINTERVAL” [CR]
Details
Get setting status of Lamp interval
Acceptable
“000_%1” [CR]
%1
“0024”------------------ 24 Hours is selected
“0200”------------------ 200 Hours is selected
“0500”------------------ 500 Hours is selected
“1000”------------------ 1000 Hours is selected
“2000”------------------ 2000 Hours is selected
“OFF” ------------------ Off is selected
Response
Unacceptable
“?” [CR]
9.9.13 CR_LAMPLIFECONTRL Command
Command
“CR_LAMPLIFECONTRL” [CR]
Details
Get setting status of Lamp life control.
(Available only in the normal Power ON status)
Acceptable
“000_%1” [CR]
%1
“MODE1” ---------------- Mode1 is selected
“MODE2”----------------- Mode2 is selected
Response
Unacceptable
“Error Code” [CR]