Sanyo PLC-HF10000L RS232 Expand - Page 49

CF_BLENDSTART Command, 9.21 CF_BLENDBLK Command, 9.22 CF_BLENDBLKALL Command

Get Sanyo PLC-HF10000L - 10000 Lumens PDF manuals and user guides View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

PLC-HF10000L Expand Serial Command Functional Specifications 8.9.20 CF_BLENDSTART Command Command "CF_BLENDSTART_%1_%2" [CR] "LEFT Left side %1 "RIGHT Right side "TOP Upper side "BOTTOM Lower side "000"-"1024 Directly specify value of direction of %1 *Value of upper limit changes by choice of %1 %2 Left 000~1024 Right 000~1024 Top 000~540 Bottom 000~540 Details Set the value of Start (Left/Right/Top/Bottom) for direction specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.21 CF_BLENDBLK Command Command "CF_BLENDBLK_%1_%2" [CR] "R Red %1 "G Green "B Blue %2 "-127" ~ "0127 Directly specify value of color of %1 Details Set value of color specified by Edge blending %1. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.22 CF_BLENDBLKALL Command Command "CF_BLENDBLKALL_%1" [CR] %1 "UP Increment value of Black level(R/G/B) by 1 "DN Decrement value of Black level(R/G/B) by 1 Details Set value of all of Black level of Edge blending. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 49/105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
PLC-HF10000L
Expand Serial Command Functional Specifications
49/105
8.9.20 CF_BLENDSTART Command
Command
“CF_BLENDSTART_%1_%2” [CR]
%1
“LEFT” ---------------------- Left side
“RIGHT” -------------------- Right side
“TOP” ----------------------- Upper side
“BOTTOM” ---------------- Lower side
%2
“000”-“1024”-------------------- Directly specify value of direction of %1
*Value of upper limit changes by choice of %1
Left ---------------------- 000~1024
Right -------------------- 000~1024
Top ---------------------- 000~540
Bottom ----------------- 000~540
Details
Set the value of Start (Left/Right/Top/Bottom) for direction specified by Edge
blending %1. (Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.21 CF_BLENDBLK Command
Command
“CF_BLENDBLK_%1_%2” [CR]
%1
“R” ---------------------- Red
“G” ---------------------- Green
“B” ----------------------- Blue
%2
“-127” ~ “0127”-------------------- Directly specify value of color of %1
Details
Set value of color specified by Edge blending %1.
(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.22 CF_BLENDBLKALL Command
Command
“CF_BLENDBLKALL_%1” [CR]
%1
“UP” ------------------------------- Increment value of Black level(R/G/B) by 1
“DN” ------------------------------ Decrement value of Black level(R/G/B) by 1
Details
Set value of all of Black level of Edge blending.
(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]