Sanyo PLC-HF10000L RS232 Expand - Page 78
CR_NMSLOT3 Command, 7.14 CR_NMSLOT4 Command, 7.15 CR_IDSLOT1 Command, 7.16 CR_IDSLOT2 Command
![]() |
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
PLC-HF10000L Expand Serial Command Functional Specifications 9.7.13 CR_NMSLOT3 Command Command "CR_NMSLOT3" [CR] Details Get the board name inserted to Slot 3 Acceptable Response %1 "000_%1" [CR] The same data as CR_NMSLOT1 Unacceptable "?" [CR] 9.7.14 CR_NMSLOT4 Command Command "CR_NMSLOT4" [CR] Details Get the board name inserted to Slot 4 Acceptable "000_%1" [CR] Response %1 The same data as CR_NMSLOT1 Unacceptable "?" [CR] 9.7.15 CR_IDSLOT1 Command Command "CR_IDSLOT1" [CR] Details Get ID information on Slot 1.This command is used to recognize the inserted board and specify the valid Input source. Acceptable "000_%1" [CR] "08" ------- DUAL-SDI board Valid Input Source: SDI1, SDI2 "16" ------- Dual-Link SDI board Valid Input Source: SDI1, SDI2, DUAL1, DUAL2, DUAL3, DUAL4, DUAL5, DUAL6 "18" ------- New HDCP-DVI board Valid Input Source: DIGITAL, ANALOG, HDCP, SCART Response %1 "19" ------- New Component & Video board Valid Input Source: ANALOG, YPBPR, VIDEO,S-VIDEO "32" ------- On-board(DVI-D+D-Sub+HDMI) Valid Input Source: DIGITAL, ANALOG, HDCP, SCART, HDMI "42" ------- On-board(5BNC+S-video) Valid Input Source: ANALOG, YPBPR, VIDEO,S-VIDEO "99" ------- No board inserted Unacceptable "?" [CR] 9.7.16 CR_IDSLOT2 Command Command "CR_IDSLOT2" [CR] Details Get ID information on Slot 2. This command is to recognize the inserted slot board and specify the valid Input source. Acceptable "000_%1" [CR] Response %1 The same as CR_IDSLOT1 Unacceptable "?" [CR] 78/105
![](/manual_guide/products/sanyo-plchf10000l-rs232-expand-2d84a50/78.png)