Sanyo PLC-HF10000L RS232 Expand - Page 58
CF_PTIME Command, 9.53 CF_FILCTL Command, 9.54 CF_FILSCRL Command, 9.55 CF_TESTPAT Command, 9.
![]() |
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
PLC-HF10000L Expand Serial Command Functional Specifications 8.9.52 CF_PTIME Command Command "CF_PTIME_%1" [CR] %1 "001" - "180 Directly specify setting time Details Set the time for Count down mode of P-timer. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting value remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.53 CF_FILCTL Command Command "CF_FILCTL_%1" [CR] %1 "ROLL Execute operation of scroll of filter Details Execute operation of scroll of filter Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.54 CF_FILSCRL Command Command "CF_FILSCRL_%1" [CR] %1 "RST Reset Filter scroll counter Details Reset Filter scroll counter Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.55 CF_TESTPAT Command Command "CF_TESTPAT_%1" [CR] "COLOR Display Color bar "GRAD1 Display 16step(white→black) "GRAD2 Display 16step(white←black) "GRAD3 Display 16step(white↓black) %1 "GRAD4 Display 16step(white↑black) "WHITE Display all white "BLACK Display all black "CROSS Display Cross "OFF Do not show test pattern display Details Execute test pattern display.(Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.56 CF_FDEFAULT Command Command "CF_FDEFAULT_%1" [CR] %1 "RST" Details Return the settings to Factory Default status (Valid only when in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 58/105
![](/manual_guide/products/sanyo-plchf10000l-rs232-expand-2d84a50/58.png)