Schwinn IC3 Indoor Cycling Bike Service Manual - Page 24
Loosen and remove the hardware that attaches the Water Bottle
![]() |
View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Disconnect the data cable from the console before you service this machine. Note: Your machine may not match the image. For reference only. 1. Be sure the Console Data Cable is disconnected from the Data Cable in the frame. Loosen and remove the screws from the back of the console. Remove the Console from the Console Bracket, and set it safely aside for reassembly. NOTICE: Do not crimp the cable. X4 #2 2. Loosen and remove the hardware that attaches the Water Bottle Holder, and set it safely aside for reassembly. Remove the Water Bottle Holder, and set it safely aside for reassembly. X3 * 24
![](/manual_guide/products/schwinn-ic3-indoor-cycling-bike-service-manual-8f11b35/24.png)
24
Note:
Your machine may not match the image. For reference only.
1.
Be sure the Console Data Cable is disconnected from the Data Cable
in the frame. Loosen and remove the screws from the back of the console.
Remove the Console from the Console Bracket, and set it safely aside for
reassembly.
NOTICE:
Do not crimp the cable.
2.
Loosen and remove the hardware that attaches the Water Bottle
Holder, and set it safely aside for reassembly. Remove the Water Bottle
Holder, and set it safely aside for reassembly.
Disconnect the data cable from the console before you service this machine.
*
X3
X4
#2