Schwinn IC3 Indoor Cycling Bike Service Manual - Page 53

™ Replace the Speed Sensor on the Schwinn™ IC3/IC7 Bikes NOTICE: This document provides instructions for the replacement of the Speed Sensor on the Schwinn™ IC3 and IC7 Bikes. Replacement Procedure Skill Level: II 8018898.050119.B If you need assistance, please call Schwinn Customer Service(if purchased in US/Canada) or your local distributor (if purchased out VLGH86&DQDGD 7R¿QG\RXUORFDOGLVWULEXWRUJRWRZZZQDXWLOXVLQWHUQDWLRQDOFRP This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2018 Nautilus, Inc. |Schwinn and the Schwinn Quality logo are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other countries.. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY ,PSRUWDQW6DIHW\,QVWUXFWLRQV%HIRUHVHUYLFLQJRUXVLQJWKLVHTXLSPHQWREH\WKHIROORZLQJZDUQLQJV This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. • Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders. • Keep bystanders and children away from the product being serviced at all times. • Disconnect all power to the machine before you service it. ‡0DNHVXUHWKDWWKHUHSDLULVGRQHLQDQDSSURSULDWHZRUNVSDFHDZD\IURPIRRWWUDI¿FDQGH[SRVXUHWRE\VWDQGHUV • Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own. • Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely affect the safety and functionality of the equipment creating a risk to users and will void the warranty. • Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them. • Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety. • Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance. Tools Required (not included) #2 Phillips screwdriver 15 mm Wrench 10 mm Wrench Flathead screwdriver 16 mm Socket and Wrench  6PDOOÀDWKHDGVFUHZGULYHU     PP6RFNHWDQG:UHQFK 25mm Crank puller 3mm hex key Tape or marking pen 5' (152 cm) length of string 53