Schwinn IC3 Indoor Cycling Bike Service Manual - Page 43
E1 that attaches the Brake Assembly E to the Frame Mount F.
![]() |
View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. Using a #2 Phillips screwdriver, loosen and remove the hardware that attaches the Brake Cover to the Main Frame. Set the hardware safely aside for reassembly. NOTICE: Hold the Brake Cover so that it does not fall. 6. Carefully remove the Brake Cover and set it safely aside for reassembly. NOTICE: Do not crimp the cable. 7. Loosen the Resistance Knob (D) to the minimum resistance setting. 8. Using a 10mm open end wrench, loosen and remove the hardware (E1) that attaches the Brake Assembly (E) to the Frame Mount (F). Remove the Brake Assembly and set it safely aside with the hardware for reassembly. D E F ( 43
![](/manual_guide/products/schwinn-ic3-indoor-cycling-bike-service-manual-8f11b35/43.png)
43
5
.
Using a #2 Phillips screwdriver, loosen and remove the hardware
that attaches the Brake Cover to the Main Frame. Set the hardware safely
aside for reassembly.
NOTICE:
Hold the Brake Cover so that it does not fall.
6.
Carefully remove the Brake Cover and set it safely aside for
reassembly.
NOTICE:
Do not crimp the cable.
7
. Loosen the Resistance Knob (D) to the minimum resistance setting.
8.
Using a 10mm open end wrench, loosen and remove the hardware
(E1) that attaches the Brake Assembly (E) to the Frame Mount (F).
Remove the Brake Assembly and set it safely aside with the hardware for
reassembly.
D
E
(ΒΈ
F