Schwinn IC3 Indoor Cycling Bike Service Manual - Page 35
right Crank Arm A.
![]() |
View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Disconnect the data cable from the console before you service this machine. Note: Your machine may not match the image. For reference only. 1. 8VLQJDÀDWKHDGVFUHZGULYHUUHPRYHWKHWKUHDGHG&DS% IURPWKH right Crank Arm (A). 2. Using a 16mm socket and wrench, remove the Flange Nut (C) under the threaded Cap (B). % A Pedal not shown A 3. Thread the Crank Puller into the Crank Arm (A). When the Crank C Puller is in the correct position, only 1-2 threads on the outer portion (CP2) of the Crank Puller should show. Note:%HVXUHWKHHQGRIWKH%ROW&3 LQWKH&UDQN3XOOHULVÀXVK with the inner surface (CP2) as shown, before use. 4. Using a 15mm wrench, turn the inner portion (CP3) of the Crank Puller clockwise. The Crank Arm (A) will slide off as it is tightened. CP1 CP2 CP3 35
![](/manual_guide/products/schwinn-ic3-indoor-cycling-bike-service-manual-8f11b35/35.png)