Schwinn IC3 Indoor Cycling Bike Service Manual - Page 36

Do not use until the machine has been fully, assembled and inspected for correct, performance

Get Schwinn IC3 Indoor Cycling Bike PDF manuals and user guides View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

5. Remove the hardware that attaches the Drive Belt Cover to the Drive Belt Inside, and set it safely aside for reassembly. Carefully remove the Drive Belt Cover and set it safely aside for reassembly. X2 X5 6. Installation is the reverse procedure. Installation does not require the use of the crank puller. Be sure the Crank Arms are connected at 180° from each other. 7. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
36
5.
Remove the hardware that attaches the Drive Belt Cover to the Drive
Belt Inside, and set it safely aside for reassembly. Carefully remove the
Drive Belt Cover and set it safely aside for reassembly.
6.
Installation is the reverse procedure. Installation does not
require the use of the crank puller. Be sure the Crank Arms are
connected at 180° from each other.
7.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
performance in accordance with the Owner’s
Manual.
X5
X2