Schwinn IC3 Indoor Cycling Bike Service Manual - Page 55
Loosen the Resistance Knob D to the minimum resistance setting.
View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5. Using a #2 Phillips screwdriver, loosen and remove the hardware that attaches the Brake Cover to the Main Frame. Set the hardware safely aside for reassembly. NOTICE: Hold the Brake Cover so that it does not fall. 6. Carefully remove the Brake Cover and set it safely aside for reassembly. NOTICE: Do not crimp the cable. 7. Loosen the Resistance Knob (D) to the minimum resistance setting. 8. Using a 10mm open end wrench, loosen and remove the hardware (E1) that attaches the Brake Assembly (E) to the Frame Mount (F). Remove the Brake Assembly and set it safely aside. D E F ( 55
55
5
.
Using a #2 Phillips screwdriver, loosen and remove the hardware
that attaches the Brake Cover to the Main Frame. Set the hardware safely
aside for reassembly.
NOTICE:
Hold the Brake Cover so that it does not fall.
6.
Carefully remove the Brake Cover and set it safely aside for
reassembly.
NOTICE:
Do not crimp the cable.
7
. Loosen the Resistance Knob (D) to the minimum resistance setting.
8.
Using a 10mm open end wrench, loosen and remove the hardware
(E1) that attaches the Brake Assembly (E) to the Frame Mount (F).
Remove the Brake Assembly and set it safely aside.
D
E
(ΒΈ
F