Home » Seagate Manuals » External Hard Drives » Seagate BlackArmor WS 110 » Manual Viewer

Seagate BlackArmor WS 110 BlackArmor PS User Guide - Page 123

B.3 Installing a SATA hard drive, B.3.1 Steps for installing a new internal SATA drive., B.3.1 - device driver

View all Seagate BlackArmor WS 110 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

It is also possible that the device is out of order, or the hard disk is not formatted. B.3 Installing a SATA hard drive Most recently manufactured PCs use the SATA interface for hard drives. In general, installing a SATA hard drive is easier than an IDE drive, as it is not necessary to configure master-slave jumpers. SATA drives use a thin interface cable with sevenpin keyed connectors. This improves airflow through the PC case. Power is supplied to SATA drives through 15-pin connectors. Some SATA drives also support legacy four-pin power connectors (Molex) - you can use a Molex or SATA connector but do not use both at the same time, because this could damage the hard drive. You'll also need a free power lead fitted with a SATA power connector. Most systems that come with SATA ports have at least one SATA power connector. If this is not the case, you will need a Molex-to-SATA adapter. In case your system has the SATA power connector but it is already occupied, use a Y-adapter that splits a lead in two. B.3.1 Steps for installing a new internal SATA drive. 1. Find an unused SATA port using the documentation provided with your PC. If you are going to connect your new SATA drive to a SATA controller card, install the card. If you are going to connect the SATA drive to the motherboard, enable applicable motherboard jumpers, if any. Most hard drive kits include a SATA interface cable and mounting screws. Attach one end of the SATA interface cable to a SATA port on the motherboard or interface card, and the other to the drive. 2. Then plug the power-supply lead or use a Molex-to-SATA adapter. 3. Prepare your drive. If you're installing a SATA 300 hard drive, check your PC's (or SATA host adapter's) documentation to make sure it supports SATA 300 drives. If it doesn't, you might need to change a jumper setting on the drive (see the drive's manual for instructions). If you have a SATA 150 hard drive, you don't need to change any settings. 4. Turn on the PC and look for the new drive in the boot-up messages. If you don't see it, enter the PC's CMOS setup program and search the BIOS configuration menu for an option that will let you enable SATA for the ports you are using (or maybe you will just need to enable SATA). See your motherboard documentation for instructions specific to your BIOS. 5. If the operating system does not recognize the SATA drive, you need the appropriate drivers for your SATA controller. If the drive is recognized, go to step 8. • Usually, it is best to obtain the latest driver version from the motherboard or SATA controller manufacturer's website. • If you download a copy of the SATA controller drivers, place the driver files to a known location on your hard drive. 6. Boot from the old hard drive. • The operating system should detect the SATA controller and install the appropriate software. You might need to provide the path to the driver files. 7. Ensure that the SATA controller and the connected SATA hard drive are correctly detected by the operating system. To do this, go to the Device Manager. Copyright (c) 2000-2009 Acronis. All rights reserved. Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved. 123

Section	Page
Chapter 1. Introduction	7
1.1 What is Seagate BlackArmor® Backup?	7
1.2 Advantages	7
1.3 System requirements and supported media	8
1.3.1 Minimum system requirements	8
1.3.2 Supported storage media	9
1.3.3 Supported operating systems	9
1.3.4 Supported file systems	9
1.4 License policy	9
1.5 Technical support	10
Chapter 2. Seagate BlackArmor Backup installation and startup	12
2.1 Installing Seagate BlackArmor Backup	12
2.1.1 Installing Seagate BlackArmor Backup	12
2.2 Extracting Seagate BlackArmor Backup	13
2.3 Running Seagate BlackArmor Backup	13
2.4 Removing Seagate BlackArmor Backup	13
Chapter 3. General information	14
3.1 The difference between file archives and disk/partition images	14
3.2 Full, incremental and differential backups	14
3.3 BlackArmor Backup Secure Zone	15
3.4 Viewing disk and partition information	15
3.5 Try&Decide	16
3.6 BlackArmor DriveCleanser, File Shredder, and System Clean-up	16
3.7 Support for Zip format	16
Chapter 4. Getting to know Seagate BlackArmor Backup	18
4.1 BlackArmor One-Click Protection	18
4.2 Program workspace	20
Chapter 5. Creating backup archives	24
5.1 Selecting what data to back up	24
5.2 Performing backup	25
5.2.1 Selecting data for backup	25
5.2.2 Selecting the target archive location	27
5.2.3 Scheduling	28
5.2.4 Backup method	29
5.2.5 Source files exclusion	30
5.2.6 Selecting the backup options	31
5.2.7 Setting automatic consolidation	32
5.2.8 Providing a comment	33
5.2.9 The operation summary and the backup process	33
5.3 Fine-tuning your backups	33
5.3.1 Archive protection	33
5.3.2 Source files exclusion	34
5.3.3 Pre/post commands	34
5.3.4 Compression level	34
5.3.5 Backup performance	35
5.3.6 Archive splitting	36
5.3.7 File-level security settings	36
5.3.8 Error handling	36
5.3.9 Additional settings	37
5.3.10 Backup reserve copy settings	37
5.3.11 Creating a custom data category for backups	38
5.4 Making reserve copies of your backups	39
Chapter 6. Restoring backup data	40
6.1 Restore under Windows or boot from CD?	40
6.1.1 Network settings in rescue mode	40
6.2 Restoring files and folders from file archives	40
6.3 Restoring disks/partitions or files from images	44
6.3.1 Starting the Restore Wizard	44
6.3.2 Archive selection	44
6.3.3 Restoration method selection	45
6.3.4 Selecting a disk/partition to restore	46
6.3.5 Selecting a target disk/partition	47
6.3.6 Changing the restored partition type	47
6.3.7 Changing the restored partition size and location	48
6.3.8 Assigning a letter to the restored partition	48
6.3.9 Setting restore options	48
6.3.10 Restoration summary and executing restoration	49
6.4 Setting restore options	49
6.4.1 Files to preserve during restoration	49
6.4.2 Pre/post commands	49
6.4.3 Restoration priority	50
6.4.4 File-level security settings	50
6.4.5 Additional settings	50
Chapter 7. Try&Decide	51
7.1 Using Try&Decide	54
7.1.2. Try&Decide options	54
7.2 Try&Decide usage examples	54
Chapter 8. Scheduling tasks	57
8.1 Creating scheduled tasks	57
8.1.1 Setting up once only execution	58
8.1.2 Setting up upon event execution	58
8.1.3 Setting up daily execution	59
8.1.4 Setting up weekly execution	60
8.1.5 Setting up monthly execution	60
8.2 Managing scheduled tasks	61
Chapter 9. Managing BlackArmor Backup Secure Zone	62
9.1 Creating BlackArmor Backup Secure Zone	62
9.2 Resizing BlackArmor Backup Secure Zone	64
9.3 Changing password for BlackArmor Backup Secure Zone	65
9.4 Deleting BlackArmor Backup Secure Zone	66
Chapter 10. Creating bootable media	67
Chapter 11. Other operations	70
11.1 Validating backup archives	70
11.2 Operation results notification	72
11.2.1 Email notification	72
11.2.2 WinPopup notification	73
11.3 Viewing Tasks and Logs	74
11.4 Consolidating backups	76
11.5 Removing backup archives	79
Chapter 12. Exploring archives and mounting images	81
12.1 Searching	81
12.2 Google Desktop and Windows Search integration	83
12.3 Mounting an image	90
12.4 Unmounting an image	92
Chapter 13. Transferring the system to a new disk	94
13.1 General information	94
13.2 Security	95
13.3 Executing transfers	95
13.3.1 Selecting Clone mode	95
13.3.2 Selecting source disk	95
13.3.3 Selecting destination disk	96
13.3.4 Partitioned destination disk	97
13.3.5 Selecting partition transfer method	97
13.3.6 Cloning with manual partitioning	98
13.3.7 Cloning summary	100
Chapter 14. Adding a new hard disk	101
14.1 Selecting a hard disk	101
14.2 Creating new partitions	101
14.3 Disk add summary	102
Chapter 15. Security and Privacy Tools	104
15.1 Using File Shredder	104
15.2 BlackArmor DriveCleanser	105
15.3 Creating custom algorithms of data destruction	108
15.4 System Clean-up	109
15.5 System Clean-up Wizard settings	110
15.5.1 \	110
15.5.2 \	110
15.5.3 \	111
15.5.4 \	112
15.5.5 \	112
15.5.6 \	113
15.6 Cleaning up separate system components	113
Appendix A. Partitions and file systems	114
Appendix B. Hard disks and BIOS setup	117
B.1 Installing hard disks in computers	117
B.1.1 Installing a hard disk, general scheme	117
B.1.2 Motherboard sockets, IDE cable, power cable	118
B.1.3 Configuring hard disk drives, jumpers	118
B.2 BIOS	119
B.2.1 Setup utility	119
B.2.2 Standard CMOS setup menu	120
B.2.3 Arranging boot sequence, advanced CMOS setup menu	121
B.2.4 Hard disk initialization errors	122
B.3 Installing a SATA hard drive	123
B.3.1 Steps for installing a new internal SATA drive.	123
Appendix C. Hard Disk Wiping methods	125
C.1 Information wiping methods’ functioning principles	125
C.2 Information wiping methods used by Seagate BlackArmor Backup	126

Match case Limit results 1 per page

123

It is also possible that the device is out of order, or the hard disk is not formatted.

B.3

Installing a SATA hard drive

Most recently manufactured PCs use the SATA interface for hard drives. In general,

installing a SATA hard drive is easier than an IDE drive, as it is not necessary to

configure master-slave jumpers. SATA drives use a thin interface cable with seven-

pin keyed connectors. This improves airflow through the PC case. Power is supplied

to SATA drives through 15-pin connectors. Some SATA drives also support legacy

four-pin power connectors (Molex) — you can use a Molex or SATA connector but

do not use both at the same time, because this could damage the hard drive. You'll

also need a free power lead fitted with a SATA power connector. Most systems that

come with SATA ports have at least one SATA power connector. If this is not the

case, you will need a Molex-to-SATA adapter. In case your system has the SATA

power connector but it is already occupied, use a Y-adapter that splits a lead in two.

B.3.1

Steps for installing a new internal SATA drive.

1. Find an unused SATA port using the documentation provided with your PC. If you

are going to connect your new SATA drive to a SATA controller card, install the

card. If you are going to connect the SATA drive to the motherboard, enable

applicable motherboard jumpers, if any. Most hard drive kits include a SATA

interface cable and mounting screws. Attach one end of the SATA interface cable to

a SATA port on the motherboard or interface card, and the other to the drive.

2. Then plug the power-supply lead or use a Molex-to-SATA adapter.

3. Prepare your drive. If you're installing a SATA 300 hard drive, check your PC's (or

SATA host adapter's) documentation to make sure it supports SATA 300 drives. If it

doesn't, you might need to change a jumper setting on the drive (see the drive's

manual for instructions). If you have a SATA 150 hard drive, you don’t need to

change any settings.

4. Turn on the PC and look for the new drive in the boot-up messages. If you don't

see it, enter the PC's CMOS setup program and search the BIOS configuration menu

for an option that will let you enable SATA for the ports you are using (or maybe

you will just need to enable SATA). See your motherboard documentation for

instructions specific to your BIOS.

5. If the operating system does not recognize the SATA drive, you need the

appropriate drivers for your SATA controller. If the drive is recognized, go to step 8.

•

Usually, it is best to obtain the latest driver version from the motherboard or

SATA controller manufacturer's website.

•

If you download a copy of the SATA controller drivers, place the driver files to a

known location on your hard drive.

6. Boot from the old hard drive.

•

The operating system should detect the SATA controller and install the

appropriate software. You might need to provide the path to the driver files.

7. Ensure that the SATA controller and the connected SATA hard drive are correctly

detected by the operating system. To do this, go to the Device Manager.