Sharp AR M207 AR-M162 AR-M207 Operation Manual Suite - Page 141
Originals
View all Sharp AR M207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
ORIGINALS ORIGINALS THAT CAN BE FAXED Original sizes Using the SPF Using the document glass Minimum original size Maximum original size A5: 210 mm (width) x 148 mm (length) (8-1/2" (width) x 5-1/2" (length)) A5R: 148 mm (width) x 210 mm (length) (5-1/2" (width) x 8-1/2" (length)) 297 mm (width) x 800 mm* (length) (11" (width) x 31-1/2"* (length)) * Long documents can be transmitted 297 mm (width) x 432 mm (length) (11" (width) x 17" (length)) Note • Originals that are not a standard size (A5, A4, A4R, B4, A3, 8-1/2" x 11", 8-1/2" x 11"R (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A4, A4R if the machine uses inch-based paper sizes)) can also be faxed. • There are restrictions on originals that can be scanned using the SPF. For more information, see "NORMAL COPYING" in the "Operation manual (for general information and copier)". * Long originals Depending on the resolution setting and the width of the original, there may not be sufficient space in memory to hold a long original. When a long original cannot be entirely scanned, select a lower resolution setting and/or shorten the original. Scanning area of original When faxing an original, note that the edges of the original cannot be scanned. Width of edges that cannot be scanned: 5 mm from top and bottom edges, 6 mm (or less) from left and right edges 5 mm 5 mm Total of 6 mm or less Automatic reduction of faxed document If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be automatically reduced. Faxed document width A3 (11" x 17") A3 (11" x 17") B4 (8-1/2" x 14") Receiving machine's paper width B4 (8-1/2" x 14") A4 (8-1/2" x 11") A4 (8-1/2" x 11") Size after reduction B4 (8-1/2" x 14") A4R (8-1/2" x 11"R) A4R (8-1/2" x 11"R) Ratio 1 : 0.78 (1 : 0.64) 1 : 0.5 (1 : 0.5) 1 : 0.64 (1 : 0.78) You can turn off automatic reduction. In this case, the left and right edges will not be transmitted. (See "AUTO REDUCE TX" on page 100.) 12