Sharp AR M207 AR-M162 AR-M207 Operation Manual Suite - Page 185
F-code confidential transmission
View all Sharp AR M207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
TRANSMISSION USING F-CODES F-code confidential transmission 1 Follow steps 1 to 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 18) and then follow the steps below. 2 Press the [SPECIAL FUNCTION] key. 2-SIDED COPY SPECIAL FUNCTION DUPLEX SCAN When the [SPECIAL FUNCTION] key is pressed, the special function selection ACC. screen appears. 3 Select "SENDING OPTIONS" with the [ ] or [ ] key. GH PQR 2-SIDED COPY SPECIAL FUNCTION SPECIAL FUNCTION FAX PRINT HOLD TIMER MODE SENDING OPTIONS 4 Press the [OK] key. 8 Press the [OK] key. 9 Enter the sub-address (maximum 20 digits) with the numeric keys. WXYZ • Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space. • If you make a mistake, press the [C] key and re-enter the correct digit(s). • If you specified a Rapid key or Speed Dial number in step 7 that has a sub-address programmed, the sub-address will appear. Go to the next step without entering a sub-address. 10 Press the [OK] key. 11 Enter the passcode (maximum 20 digits) with the numeric keys. WXYZ 5 Select "SUB ADDRESS TX" with the [ ] or [ ] key. SENDING OPTIONS SERIAL POLLING SUB ADDRESS TX SUB ADD POLLING 6 Press the [OK] key. 7 Enter the fax number of the other machine with the numeric keys, or press a Rapid key, or dial a Speed Dial number (a group key cannot be used). To clear a mistake when WXYZ entering a number with the numeric keys, press the [C] key 26 27 28 29 to clear one digit at a time. A B C 31 32 33 34 F G H A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key. • Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space. • If you make a mistake, press the [C] key and re-enter the correct digit(s). • If you specified a Rapid key or Speed Dial number in step 7 that has a passcode programmed, the passcode will appear. Go to the next step without entering the passcode. 12 Press the [OK] key. 13 Press the [START] key ( ). WXYZ @.-_ READ-END • Scanning begins. • If you are scanning from the document glass and have another page to scan, change pages and press the [START] key ( ). Repeat until all pages have been scanned and then press the key. 56