Sharp AR M207 AR-M162 AR-M207 Operation Manual Suite - Page 220
TROUBLESHOOTING, Problem, Check, Solution
View all Sharp AR M207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
TROUBLESHOOTING Problem The transmitted image is distorted. White or black lines appear in the transmitted image. Transmission does not take place at the specified time. Printing does not take place after reception. A received fax prints out blank. The received image is faint. The received image is distorted. A dial tone is not heard through the speaker. The machine does not ring. Dialling is not possible. Check Were line conditions poor due to thunder or another reason? Were the resolution and exposure settings suitable? Is the document glass or the scanning glass for the SPF (the long, narrow glass) dirty? Is the machine's clock set to the correct time? Does an error message appear regarding adding paper, replenishing toner, or a misfeed? (This means that printing is not possible.) Was the wrong side of the original scanned in the transmitting machine? Is the original faint? Were line conditions poor due to thunder or another reason? Is the volume set to "low"? Has the ringer volume been turned off? Is the telephone line properly connected? If an extension phone is connected to the machine, has the "EXTENSION TEL" program been enabled? Solution Try the transmission again. Check the resolution and exposure settings. Clean the document glass or the scanning glass for the SPF. Set the clock to the correct time. Restore printing capability as instructed by the display message. Printing will begin. Check with the operator of the transmitting machine. Ask the other party to re-send the fax using a suitable exposure setting. Ask the other party to send the fax again. Set the speaker volume to "middle" or "high". Set the ringer volume to "low", "middle", or "high". Check the connections. Enable this program. Page - "SELECTING RESOLUTION AND EXPOSURE SETTINGS" on page 15 "CLEANING THE MACHINE" in the "Operation manual (for general information and copier)" "DATE & TIME SET" on page 99 "WHEN AN ALARM SOUNDS AND A WARNING MESSAGE IS DISPLAYED" on page 88 - - - "SPEAKER VOLUME" on page 97 "SPEAKER VOLUME" on page 97 "Line connection" on page 4 "EXTENSION TEL" on page 97 7 Telephone 91