Sharp PN-T322B Service Manual - Page 11

CHAPTER 1. OUTLINE OF THE PRODUCT ■ REAR VIEW 3 1 4 5 1 Speakers 2 USB flash drive cover 3 Vents 4 Main power switch 5 AC input terminal 6 USB port 7 RS-232C input terminal 8 Audio output terminal 9 AV video/AV audio input terminal F AV COMPONENT input terminal G PC audio input terminal H PC D-SUB input terminal I PC/AV DVI-D input terminal J PC/AV HDMI input terminal K USB cable (for touch panel: PN-T322B) 2 K 6 7 8 9 F G H I J ■ REMOTE CONTROL UNIT 1 2 7 3 8 4 5 9 6 1 Signal transmitter 2 POWER button 3 MUTE button Turns off the volume temporarily. Press the MUTE button again to turn the sound back to the previous level. 4 VOL +/- Pressing or displays the VOLUME menu buttons when the menu screen is not displayed. BRIGHT +/buttons Press or to adjust the volume of the sound. If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears. Pressing or displays the BRIGHT menu when the menu screen is not displayed. Press or to adjust the brightness. If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. Cursor control ( / / / ) buttons 5 DISPLAY button Displays monitor information. When you press this button again, the display disappears. 6 MODE button The display disappears automatically after about 15 seconds. Each time you press this button, the color mode changes in the following order: STD (Standard) 3 VIVID 3 sRGB 3 STD... "sRGB" can only be selected when the input mode is "DVI-D" or "D-SUB". sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal's characteristics and represents color tone close to its original image. PN-T321/T322B OUTLINE OF THE PRODUCT 1 - 7