Sharp PN-T322B Service Manual - Page 8

Compatible Signal Timing Av, Power Management, Ddc Plug And Play, Supplied Accessories

Page 8 highlights

CHAPTER 1. OUTLINE OF THE PRODUCT 1 - 4. COMPATIBLE SIGNAL TIMING (AV) Screen resolution 1920 x 1080p *1 1920 x 1080i *1 1280 x 720p 720 x 576p 720 x 480p 720 (1440) x 576 720 (1440) x 480i Frequency 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz DVI-D --Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes ------- HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Component --Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes *1 Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. 1 - 5. POWER MANAGEMENT This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor's power management function to work. DPMS: DISPLAY POWER MANAGEMENT SIGNALING DPMS ON STATE STANDBY SUSPEND OFF STATE Screen Display No display Power consumption 82W 0.9W Hsync Vsync Yes Yes No Yes Yes No No No DMPM: DIGITAL MONITOR POWER MANAGEMENT DMPM Monitor ON Active OFF Screen Display No display Power consumption 82W 10W 1 - 6. DDC (PLUG AND PLAY) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. 1 - 7. SUPPLIED ACCESSORIES n Liquid Crystal Display Monitor: 1 n Remote control unit: 1 (Battery preinstalled) n Cable clamp: 1 n Power cord: 1 n Conversion cable (for AV component): 1 (green/ blue/ red) n Conversion cable (for AV video): 1 (red/ white/ yellow) n CD-ROM (Utility Disk for Windows): 1 * Sharp Corporation holds authorship rights to the Utility Disk pro- gram. Do not reproduce it without permission. n Setup Manual: 1 n Vertical sticker (Operation panel): 1 n Vertical sticker (Logo): 1 n USB flash drive cover: 1 n USB flash drive cover screw (+): 1 (PN-T321) n USB flash drive cover screw (-): 1 (PN-T322B) n Cover Sharp logo: 1 Place this sticker onto the SHARP logo to cover the logo. n Air blower: 1 (PN-T322B) * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. PN-T321/T322B OUTLINE OF THE PRODUCT 1 - 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

CHAPTER 1.
OUTLINE OF THE PRODUCT
PN-T321/T322B
OUTLINE OF THE PRODUCT
1 – 4
1 - 4.
COMPATIBLE SIGNAL TIMING (AV)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
1 - 5.
POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: DISPLAY POWER MANAGEMENT SIGNALING
DMPM: DIGITAL MONITOR POWER MANAGEMENT
1 - 6.
DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
1 - 7.
SUPPLIED ACCESSORIES
n
Liquid Crystal Display Monitor: 1
n
Remote control unit: 1 (Battery preinstalled)
n
Cable clamp: 1
n
Power cord: 1
n
Conversion cable (for AV component): 1 (green/ blue/ red)
n
Conversion cable (for AV video): 1 (red/ white/ yellow)
n
CD-ROM (Utility Disk for Windows): 1
*
Sharp Corporation holds authorship rights to the Utility Disk pro-
gram. Do not reproduce it without permission.
n
Setup Manual: 1
n
Vertical sticker (Operation panel): 1
n
Vertical sticker (Logo): 1
n
USB flash drive cover: 1
n
USB flash drive cover screw (+): 1 (PN-T321)
n
USB flash drive cover screw (-): 1 (PN-T322B)
n
Cover Sharp logo: 1
Place this sticker onto the SHARP logo to cover the logo.
n
Air blower: 1 (PN-T322B)
*
For environmental protection!
Do not dispose of batteries in household waste.
Follow the disposal instructions for your area.
Screen resolution
Frequency
DVI-D
HDMI
Component
1920 x 1080p
*
1
24Hz
---
Yes
---
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1920 x 1080i
*
1
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1280 x 720p
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
720 x 576p
50Hz
Yes
Yes
Yes
720 x 480p
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
720 (1440) x 576
50Hz
---
Yes
Yes
720 (1440) x 480i
59.94Hz
---
Yes
Yes
60Hz
---
Yes
Yes
DPMS
Screen
Power
consumption
Hsync
Vsync
ON STATE
Display
82W
Yes
Yes
STANDBY
No
display
0.9W
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
Monitor ON
Display
82W
Active OFF
No display
10W