Home » Sharp Manuals » Computer Monitors » Sharp PN-T322B » Manual Viewer

Sharp PN-T322B Service Manual - Page 22

Adjustment, Pn-t321/t322b, Compo, Video, Wipe From Center To Edge

Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING ITEM ADJUSTMENT DSUB OPTION COLOR SYSTEM AUTO PAL PAL-60 SECAM NTSC3.58 D NTSC4.43 AUDIO OUTPUT VARIABLE1 VARIABLE2 FIXED As shown in the left column D INPUT SIGNAL 480 AUTO As shown in the left column (D-SUB input) LINES 640 x 480 D 848 x 480 768 AUTO As shown in the left column LINES 1024 x 768 1280 x 768 D 1360 x 768 1366 x 768 1050 1400 x 1050 As shown in the left column LINES 1680 x 1050 D USB EFFECT WIPE TOP WIPE BOTTOM WIPE LEFT WIPE RIGHT DIAGONAL WIPE LEFT TOP DIAGONAL WIPE RIGHT TOP DIAGONAL WIPE LEFT BOTTOM DIAGONAL WIPE RIGHT BOTTOM EXTEND FROM CENTER H EXTEND FROM CENTER V COMPRESS TO CENTER H COMPRESS TO CENTER V WINDOW H WINDOW V WIPE FROM CENTER TO EDGE WIPE FROM EDGE TO CENTER DISSOLVE NO TRANSITION EFFECT RANDOM TRANSITION EFFECT INTERVAL *2 SHORT MEDIUM1 MEDIUM2 LONG *1 In the PN-T321, some firmware versions may allow selection of ENGLISH/FRANCAIS only. *2 In the PN-T321, some firmware versions may allow selection of SHORT/MEDIUM/LONG. PN-T321/T322B DVI- COMPO- VIDEO HDMI USB DI NENT D D D D D D D D D D D D PN-T321/T322B INSTALLATION, ADJUSTMENT, SETTING 2 - 7

Section	Page
CHAPTER 1. OUTLINE OF THE PRODUCT	5
1. SPECIFICATIONS	5
2. PART NAMES AND FUNCTION	10
3. SCREEN DISPLAY	15
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING	16
1. INSTALLATION	16
2. ADJUSTMENT	20
3. Setting up the PC (TOUCH panel driver)	25
CHAPTER 3. CONTROLLING THE MONITOR WITH A PC	28
1. RS-232C	28
CHAPTER 4. IMPORTANT INFORMATION FOR SERVICING THE DISPLAY	32
1. I/F PWB, LCD MODULE, PARTS REPLACEMENT PROCEDURES	32
CHAPTER 5. SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES	34
1. OPERATING PROCEDURES	34
2. AGING	35
3. FACTORY RESET	35
4. EDID WRITE PROTECT	35
5. NTSC SETUP LEVEL	36
6. INSTRUCTIONS FOR LAUNCHER TOOL	36
7. SERIAL NUMBER WRITING PROCEDURES	37
8. USAGE TIME SETTING PROCEDURE	38
9. TEMPERATURE MONITOR SETTING PROCEDURES	39
10. PERATING PROCEDURES Of TOUCH PANEL INSPECTION TOOL	41
CHAPTER 6. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES	45
1. MAIN FIRMWARE UPDATE PROCEDURE	45
2. EDID WRITING PROCEDURES	46
CHAPTER 7. DISASSEMBLY AND ASSEMBLY	51
1. PWB AND WIRING DIAGRAM	51
2. REAR COVER	53
3. SPEAKER UNIT	54
4. LED DRIVER PWB	55
5. INLET HARNESS/AC SWITCH	56
6. POWER SUPPLY PWB	58
7. TEMPERATURE SENSOR PWB	58
8. I/F PWB	59
9. LCD MODULE	63
10. KEY PWB	65
11. TOUCH PANEL ASSEMBLY (PN-T322B)	66
CHAPTER 8. TROUBLESHOOTING	68
1. THE POWER IS NOT TURNED ON (THE LED DOES NOT LIGHT UP)	68
2. THE REMOTE CONTROLLER DOES NOT WORK	69
3. THE DISPLAY DOES NOT APPEAR (DISPLAY ABNORMALITY)	69
4. THE BACKLIGHT DOES NOT LIGHT UP	70
5. NO SOUND IS GENERATED/ REPRODUCED SOUND ABNORMALITY	70
6. RS-232C CONTROL DOES NOT WORK	70
7. NO RESPONSE FOR TOUCHING	71
8. THE TOUCH POSITION IS SHIFTED	72
9. THE TOUCH POSITION IS SHIFTED EVEN AFTER CALIBRATION	72
10. MULTI-TOUCH IS UNABLE	73
CHAPTER 9. HARDWARE DESCRIPTIONS	74
1. SYSTEM DESCRIPTION	74
2. FUNCTIONS	76
3. PERFORMANCE SPECIFICATIONS	76
4. BLOCK DIAGRAM	77