Sharp PN-T322B Service Manual - Page 61
NOTE FOR ASSEMBLY, SCREW TIGHTENING TORQUE, Angle, Connectors, Plate, USB cable, fixing plate, Screw
View all Sharp PN-T322B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
CHAPTER 7. DISASSEMBLY AND ASSEMBLY ■ PN-T322B 1 ) Remove four screws A (4 x 6, Black) and four screws B (3 x 6, Silver), and remove the angle. Disconnect the connector. Remove one screw C (3 x 6, Silver), and remove the USB cable fixing plate and the USB cable. Remove two screws D (3 x 6, Silver) and remove the plate. USB cable Screw A x 4 Connectors Angle Screw B x 4 The orientation of the ground terminals is as shown in the illustration. USB cable fixing plate Screw C Screw D x 2 Plate CAUTION NOTE FOR ASSEMBLY n Make sure that the ground terminals are attached horizontally as shown in the illustration. SCREW TIGHTENING TORQUE n Screw A: 0.7 - 0.9N•m n Screw B: 0.5 - 0.6N•m n Screw C, D: 0.5 - 0.6N•m PN-T321/T322B DISASSEMBLY AND ASSEMBLY 7 - 11