Sharp PN-Y556 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Operation Manual - Page 22

Playing the Files in a media You can play image, video, and audio files in media (USB flash drive or SD memory card) that is connected to the monitor. For information on USB flash drive, see page 12. For information on SD memory card, see page 13. Caution • A USB flash drive and SD memory card cannot be connected simultaneously. Auto playback The image files or video files in a USB flash drive or an SD memory card can be automatically played. Create a folder with the name "autoplay" in the top level of the USB flash drive or the SD memory card. Files in the "autoplay" folder that meet the criteria below play automatically. (Supported formats and file names are different from other playback.) Format Image files : *.jpg *1 or Video files : *.wmv *1 File name 001.jpg - 030.jpg *2 or 001.wmv - 030.wmv *2 (Files are played by number in ascending order. If a number is missing in the sequence, that number is skipped.) Number of files Up to 30. *1 For details, see "Supported formats" (see page 26). *2 File extension must be in lowercase. n Preparations Set the type of files for auto play. 1. Change an input mode to other than [Media Player]. (See page 20.) 2. Press MENU and select SETUP with or . 3. Press ENTER and select AUTO PLAY with or . 4. Press ENTER and select PHOTO or MOVIE with or . 5. Press . ENTER 6. Press . MENU n Auto playback of files 1. Connect a media to be played (the USB flash drive or the SD memory card) (see pages 12,13) and turn the power ON. You can connect a media to be played (the USB flash drive or the SD memory card) (see pages 12,13) after turning the power ON. TIPS • Auto play will not start if a folder, file format, or file name indicated in "Auto playback" is not correctly set, and if AUTO PLAY is not correctly set in the SETUP menu. n To stop auto play 1. Press . INPUT Caution • Mixed playback of image files and video files is not possible. To display a mix of image files and video files, see "SCHEDULE" (see page 33). TIPS • During auto play, it is better to turn the power ON/OFF using the remote control unit. When the power is turned ON/OFF using the main power switch, it takes a longer time until auto play is started. It also takes a longer time for playback to start from POWER SAVE MODE and ON. • The displayed screen size is as follows: Image: NORMAL Video: Screen size of input mode before auto play* * To have auto play always play at the same size, set the screen size of each input mode to the same size. E 22