Sharp PN-Y556 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Operation Manual - Page 46

Specifications nProduct Specifications Model PN-Y556 PN-Y496 PN-Y436 PN-Y326 LCD component 55" Class 49" Class 43" Class 32" Class [54-5/8 inch [48-1/2 inch [42-1/2 inch [31-9/16 inch (138.78cm) diagonal] (123.20cm) diagonal] (107.98cm) diagonal] (80.13cm) diagonal] TFT LCD TFT LCD TFT LCD TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 16.77 million colors Pixel pitch Max. brightness (typical) 0.630 mm (H) × 0.630 mm (V) 450 cd/m2 *1 0.559 mm (H) × 0.559 mm (V) 0.490 mm (H) × 0.490 mm (V) 0.364 mm (H) × 0.364 mm (V) 400 cd/m2 Contrast ratio (typical) 1,100 : 1 Viewing angle 178° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 47-5/8 (W) x 42-1/4 (W) x 37-1/16 (W) x 27-1/2 (W) x 26-13/16 (H) (1209.6 x 680.4) 23-3/4 (H) (1073.8 x 604.0) 20-13/16 (H) (941.2 x 529.4) 15-7/16 (H) (698.4 x 392.0) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω], HDMI Sync signal Horizontal/vertical separate (TTL: positive/negative) Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input PC/AV terminals PC HDMI x 1 Mini D-sub 15 pin, 3 rows x 1 DVI-D 24 pin (HDCP compatible) x 1 Audio 3.5 mm mini stereo jack x 2 Serial (RS-232C) D-sub 9 pin x 1 Output PC DVI-D 24 pin (HDCP compatible) x 1 terminals Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 USB port USB flash drive (Type A) Power supply terminal 5V, 2A (USB TYPE A connector) SD card slot SD memory card (SD memory card/SDHC memory card) LAN terminal 10 BASE-T/100 BASE-TX Speaker output 7 W + 7 W 5 W + 5 W Power requirement AC 100 - 240 V, 1.2 A, 50/60 Hz AC 100 - 240 V, 1.0 A, 50/60 Hz AC 100 - 240 V, 0.9 A, 50/60 Hz AC 100 - 240 V, 0.8 A, 50/60 Hz Operating temperature *2 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption (Input signal waiting mode *3/ standby mode *4) 105W (7.0W/8.0W) 87W (7.0W/8.0W) 76W (7.0W/8.0W) 69W (7.0W/8.0W) Dimensions Approx. 48-9/16 (W) x Approx. 43-3/16 (W) x Approx. 38 (W) x (excluding protrusions) inch (mm) 1-13/16 (D) x 1-13/16 (D) x 1-13/16 (D) x Approx. 28-1/2 (W) x 2-3/16 (D) x 27-15/16 (H) 24-15/16 (H) 22 (H) 16-11/16 (H) (1233.0 x 46.0 x 710.0) (1097.0 x 46.0 x 634.0) (965.0 x 46.0 x 559.0) (724.5 x 56.0 x 424.0) Weight lbs. (kg) Approx. 54.0 (24.5) Approx. 44.1 (20.0) Approx. 33.1 (15.0) Approx. 19.8 (9.0) *1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness. *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. If you will use the monitor in a flat installation (tilted more than 20° (upward or downward)), please use at an ambient temperature between 32°F (0°C) and 104°F (30°C). *3 When SUPPLY USB POWER is set to OFF. *4 When POWER SAVE MODE is set to OFF and SUPPLY USB POWER is set to OFF. When POWER SAVE MODE is set to ON: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. E 46