Sharp PN-Y556 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Operation Manual - Page 31

Power Management, Autoplay See Supply Usb Power, All Reset

Get Sharp PN-Y556 PDF manuals and user guides View all Sharp PN-Y556 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Menu Items POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. AUTOPLAY (See page 22.) Set the type of file to be automatically played from a USB flash drive or an SD memory card. SUPPLY USB POWER ON Power can be supplied from a powered USB port. OFF Power is not supplied from a powered USB port. Turn off the power of the connected device before changing the setting to OFF. Otherwise there is a risk that data in the connected device will be lost. ALL RESET Resets the settings to the factory default settings. (The settings in LAN SETUP are retained.) TIPS • If COLOR MODE is set to sRGB, the following items cannot be set. WHITE BALANCE, PRESET, USER and GAMMA • When the COLOR MODE is set to HIGH ILLUMINANCE or VIVID, GAMMA can not be adjusted. • When ENLARGE is used, the SCREEN MOTION function is disabled. • Even when LED is set to OFF, the power LED will alternately blink red and green if a temperature alert occurs. • When SUPPLY USB POWER is set to ON, POWER SAVE MODE cannot be set to ON. 31 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
31
E
Menu Items
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.
AUTOPLAY (See page 22.)
Set the type of file to be automatically played from a USB flash drive or an SD memory card.
SUPPLY USB POWER
ON
............................
Power can be supplied from a powered USB port.
OFF
..........................
Power is not supplied from a powered USB port. Turn off the power of the connected device before
changing the setting to OFF. Otherwise there is a risk that data in the connected device will be lost.
ALL RESET
Resets the settings to the factory default settings. (The settings in LAN SETUP are retained.)
TIPS
•
If COLOR MODE is set to sRGB, the following items cannot be set.
WHITE BALANCE, PRESET, USER and GAMMA
•
When the COLOR MODE is set to HIGH ILLUMINANCE or VIVID, GAMMA can not be adjusted.
•
When ENLARGE is used, the SCREEN MOTION function is disabled.
•
Even when LED is set to OFF, the power LED will alternately blink red and green if a temperature alert occurs.
•
When SUPPLY USB POWER is set to ON, POWER SAVE MODE cannot be set to ON.