Sharp PN-Y556 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Operation Manual - Page 40

Controlling the Monitor with a computer (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents * DATE/TIME SETTING DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute LAN SETUP DHCP client DHCP WR 0-1 0-1 0: OFF, 1: ON IP Adress IPAD WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero. Example: 192168150001 Subnet mask SBMK WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero. Example: 255255255000 Default gateway DFGW WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero. Example: 000000000000 DNS1 DNS1 WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero. Example: 000000000000 DNS2 DNS2 WR XXXXXXXXXXXX XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero. Example: 000000000000 FTP ON/OFF SELECT FCHE WR 0-1 0-1 0: FTP connection OFF, 1:FTP connection ON MONITOR NAME MNTR WR FTP Username FUSR WR XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX X: Sixteen characters or less; half-width alphanumeric characters, "-", and "_". XXXXXXXX (The field cannot be left blank, and spaces cannot be entered.) XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_". ○ (The field cannot be left blank, and spaces cannot be entered.) FTP Password FPAS WR XXXXXXXX XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_". (The field cannot be left blank, and spaces cannot be entered.) Telnet USERNAME USER WR XXXXXXXX XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_". (The field can be left blank, but spaces cannot be entered.) ID SETTING Telnet PASSWORD PASS WR ID NO.SETTING IDST W R ID NO. SETTING IDSL W (ONCE) ID NO. SETTING IDLK W (SUBSEQUENT) MULTI ENLARGE ENLG WR ENLARGE MODE EMHV WR IMAGE POSITION EPHV WR (M x N) BEZEL ADJUST BZCO WR ENLARGE/ ESHV WR IMAGE POSITION SETTING THERMAL SENSOR SETTING STDR WR XXXXXXXX 0-25 1-25 0 1-25 0 0-1 11-55 11-55 0-1 XXYY 0-3 XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_". (The field can be left blank, but spaces cannot be entered.) Sets the monitor's ID number. ("0" means "no ID number".) 0-25 Returns the monitor's ID number. Sets a monitor ID number. This ID number is only effective for the command immediately after this command. Clears the ID number if one has been designated. Sets a monitor ID number. This ID number is effective for the next and all subsequent commands after this command. Clears the ID number if one has been designated. 0-1 0: OFF, 1: ON 11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.) 11-55 Specifies values in the order of IMAGE POSITION IN LONGEST/ SHORTEST - DIRECTION. 0-1 0: OFF, 1: ON XXYY XX: ENLARGE MODE (Same as EMHV), YY: IMAGE POSITION (Same as EPHV) 0-3 0: LANDSCAPE, 1: PORTRAIT, 2: FACE UP, 3: FACE DOWN ADJUSTMENT MONITOR ALCM WR 0-1, 3 0-1, 3 0: UNLOCKED, 1: LOCK ALL, 3: LOCK EXCEPT POWER LOCK BUTTONS REMOTE ALCR WR 0-3 0-3 0: UNLOCKED, 1: LOCK ALL, 2: LOCK EXCEPT VOLUME, ○ CONTROL 3: LOCK EXCEPT POWER Autoplay ATPL WR 0-1 0-1 0: PHOTO, 1: MOVIE ALL RESET RSET W 1 - E 40