Sharp VL-Z7U Operation Manual - Page 27
Installing the Battery to, Remote Control
![]() |
UPC - 074000353190
View all Sharp VL-Z7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Preparation Installing the Battery to Remote Control The supplied CR 2025 type lithium battery is used to power the remote control unit. 1 Hold the remote control facing down, and pull out the battery holder while pressing the tab toward the center. Tab 2 Insert the larger lithium battery into the battery holder with the H side of the battery facing the m side of the holder. Notes on the Use of the Lithium battery CAUTION The battery used in this device may present a risk of fire of chemical burn if mistreated. Do not recharge, disassemble, heat above 212°F (100°C) , or incinerate. Replace battery with the type CR1216 for the camcorder and the type CR2025 for the remote control unit of Toshiba Battery Co., Ltd. only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire. • Do not short-circuit, recharge, disassemble, or heat the lithium battery. • Should the lithium battery leak, wipe the battery compartment clean, and then insert a new battery. • The lithium batteries will last about one year under normal usage. H side, CR 2025 type lithium battery "m" side 3 Insert the battery holder back into position. 13
![](/manual_guide/products/sharp-vlz7u-operation-manual-fb3be8c/27.png)