Sharp VL-Z7U Operation Manual - Page 43
Using Earphones, Commercially, Available, Adjusting the Phones, Volume
![]() |
UPC - 074000353190
View all Sharp VL-Z7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Basic Operations Using Earphones (Commercially Available) Available modes: Tape Playback, Tape Camera You can monitor the sound via stereo earphones (commercially available) during playback or recording. Stereo earphones with a 3.5 mm diameter plug can be used with this camcorder. Connect the plug of stereo earphones to the earphones jack on the camcorder as shown below. Earphones jack Adjusting the Phones Volume Available mode: Tape Camera You can adjust the phones volume if sound through the earphones is difficult to hear. 1 Set the Media Selection switch to V, then hold down the Lock button and set the Power switch to v (see page 21). 2 Press the DISPLAY button until the mode screen appears (see page 31). 3 Press l or m on the Operation button to select "MENU", then press the center of the Operation button. 4 Press l or m to select "EXECUTE", then press the center of the Operation button. 5 Press l or m to select Z, then press the center of the Operation button. OTHERS 1 DE FAULT EXECUTE R EMO T E ON BEEP ON PHONE S VOL - + DEMO MODE O F F LANGUAGE ENGL I SH RE TURN Notes: • Before connecting stereo earphones, turn the camcorder volume down to the lowest setting. • The built-in speaker automatically turns off when stereo earphones are connected to the earphones jack. 6 Press l or m to select "PHONES VOL" , then press the center of the Operation button. 7 Press j or k to adjust to the desired volume level, then press the center of the Operation button. PHONES VOL - Decrease + Increase 8 Press the DISPLAY button to turn off the menu screen. 29
![](/manual_guide/products/sharp-vlz7u-operation-manual-fb3be8c/43.png)