Sharp VL-Z7U Operation Manual - Page 41
Playback
UPC - 074000353190
View all Sharp VL-Z7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Basic Operations Basic Operations Playback Tape Playback Note: • If you press the Start/Stop button in Tape Available mode: Tape Playback Playback mode, the "g" mark appears and the camcorder enters Recording Standby mode. If you do not intend to record, press The LCD monitor screen functions as a handy playback monitor. Nothing needs to be connected, allowing instant on-screen playback with the sound through the built-in l to turn the "g" mark off, then press m to begin playback. This will ensure your previous recording is not erased (see pages 62-65). speaker. Media Selection To stop playback switch Press l. Power switch Operation button To turn the power off 1 Set the Media Selection switch to V. 2 Hold down the Lock button and set the Power switch to w. Set the Power switch to OFF without pressing the Lock button. Note: • The tape automatically rewinds when playback reaches the end of the tape. Watching the playback in Lock button the viewfinder 3 Press j (or k) on the Operation button to rewind (or fast forward) the tape to the desired point. You can also watch the playback in the viewfinder by closing the LCD monitor with the screen facing in. You cannot monitor the sound through the speaker when watching the playback in the viewfinder. 4 Press m to begin playback. 27