Sharp XG-MB70X Setup Guide - Page 15

Controlling the Projector via LAN Making General Settings for the Network (Network - General) Setting for Sending E-mail when an Error Occurs (Mail - Originator Setting) On this screen, you can make general settings relating to the network. Items Projector Name Auto Logout Time Data Port Search Port Description Setting the projector name. Setting the time interval in which the projector will be automatically disconnected from the network in units of a minute (from 1 to 65535 minutes). If the set value is made 0, the Auto Logout function is disabled. Setting the TCP port number used when exchanging a data with the projector (from 1025 to 65535). Setting the port number used when searching for the projector (from 1025 to 65535). After clicking the "Apply" button, the set values appear. Confirm that the values are set properly, and then click the "Confirm" button. Note • After setting items, wait for 10 seconds and then re-access. • Projector Name can be up to 12 characters. • You can input the characters below : A-Z, 0-9 space (When "a-z" are input, they are converted to "A-Z" automatically.) On this screen, you can make settings for sending e-mail to report when the projector has generated an error. Items SMTP Server Originator E-mail Address Originator Name Setting example / Remarks Setting an SMTP server address for e-mail transmission. e.g.1 : 192.168.150.253 e.g.2 : smtp123.sharp.co.jp * When using a domain name, make settings for the DNS server. Setting the projector's e-mail address. The e-mail address set here becomes Originator E-mail Address. Setting the sender's name. The name set here appears in the "Originator Name" column of the body of the message. Note • SMTP Server, Originator E-mail Address and Originator Name can be up to 64 characters. • You can input the characters below: SMTP Server and Originator E-mail Address : a-z, A-Z, 0-9 You can input "@" only one time for "Originator E-mail Address".) Originator Name : a-z, A-Z, 0-9 space -15