Sharp XG-MB70X Setup Guide - Page 18
When Connecting Using, Telnet
View all Sharp XG-MB70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting the Projector Using RS-232C or Telnet When Connecting Using Telnet 1 Click"Start"from theWindows® desk- top and select "Run". 2 Enter"telnet 192.168.150.2"in the text box that opens up. (If the IP address of the projector is 192.168.150.2.) 3 Click the "OK" button. ▼SETUP MENU SETUP MENU [1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup> Note • If the IP address has been changed, ensure to enter the new IP address in step 2. • User name and password are not set in the factory default settings. • If the user name or password is entered incorrectly three times in steps 4 or 5, SETUP MENU will be quit. 4 "User Name:" is displayed. Input the user name and press the "Enter" key. • If a user name has not yet been set, just press the "Enter" key. 5 "Password:" is displayed. Input the password and press the "Enter" key. • If a password has not yet been set, just press the "Enter" key. 6 Input "setup" and press the "Enter" key. • SETUP MENU will be displayed. -18