Sharp XG-MB70X Setup Guide - Page 6
Setting up the Projector Network Environment
View all Sharp XG-MB70X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting up the Projector Network Environment This section describes the basic procedure for using the projector via the network. If the network is already constructed, the projector's network settings may need to be changed. Please consult your network administrator for assistance with these settings. 1. Connecting the projector to a computer Connect a LAN cable (category 5, cross-over type) between the computer and projector. LAN cable (commercially available) Page 7 2. Setting an IP address for the computer Adjust the IP settings of the computer to enable one-to-one communications with the projector. Temporarily change the computer's IP address. 3. Setting up a network connection for the projector Adjust the projector network settings to conform to your network. Pages 8, 9 Use Internet Explorer (version 5.0 or later) to make various projector settings. Page 10 • Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries. • All other company or product names are trademarks or registered trademarks of their respective companies. -6