Singer 9980 QUANTUM STYLIST Instruction Manual - Page 14
Removable Extension, Table, Changing The Presser
![]() |
View all Singer 9980 QUANTUM STYLIST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
REMOVABLE EXTENSION TABLE A. REMOVING THE EXTENSION TABLE Hook your finger under the left bottom side of the removable extension table and slide it to the left. To attach, push the table to the right. B. OPENING THE ACCESSORY CASE Hook your finger under the left side of the accessory drawer cover and pull toward you. Note: Your machines accessories are stored inside this drawer. CHANGING THE PRESSER FOOT The presser foot must be changed according to the stitch you sew, or work you do. CAUTION: To prevent accidents. Turn off the power switch before you change the presser foot. A. CHANGING THE PRESSER FOOT 1. Turn the hand wheel toward you until the needle is at its highest point. 2. Raise the presser foot lifter. 3. Remove the presser foot by pushing the presser foot release lever toward you. 4. Place desired foot with its pin directly under the slot in presser foot holder. 5. Lower the presser foot lifting lever and the presser foot will snap into place. B. REMOVING THE PRESSER FOOT HOLDER When attaching presser feet that have their own shank, or when cleaning the machine, you should remove the presser foot holder. 1. Remove the presser foot. 2. Loosen the presser foot thumb screw and remove the presser foot holder. 3. To replace the holder, pull up the holder as far as it will go from bottom of presser bar. 4. Tighten the thumb screw. 14
![](/manual_guide/products/singer-9980-quantum-stylist-instruction-manual-71f4a70/14.png)