Singer 9980 QUANTUM STYLIST Instruction Manual - Page 18
Connecting The, Machine, Foot Controller
View all Singer 9980 QUANTUM STYLIST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTING THE MACHINE DANGER: To reduce the risk of electric shock. Never leave unattended when plugged in. Always unplug this machine from the electric outlet immediately after using and before maintenance. WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 1. Place machine on stable table. 2. Connect the power line cord to the machine by inserting the 2-hole plug into the terminal box. 3. Connect the power line plug to the electric outlet. 4. Turn on the power switch. 5. A lamp will light up when switch is turned on. 6. To disconnect, turn the power switch to the off position (symbol O), then remove plug from outlet. FOR UNITED STATES AND CANADA USERS: POLARIZED PLUG INFORMATION This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. FOOT CONTROLLER Use of foot controller will permit control of start, stop and speed with your foot. When the foot controller is connected, start/stop button will be deactivated. (See page 20) 1. Turn off the power switch. (symbol O) 2. Push foot controller plug into the jack on machine. 3. Place foot controller at your feet. 4. Turn on the power switch. 5. A lamp will light up when switch is turned on. 6. The harder you press the foot controller, the faster the machine will sew. The machine will stop when foot controller is released. WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons. 1. Turn off the power when connecting the foot controller to the machine. 2. Handle the foot controller with care and avoid dropping it on the floor. Be sure not to place anything on top of it. 3. Use only foot controller provided with this machine. (Type 4C-337B) 18