Sony DAV-DX255 Operating Instructions - Page 69
Press, to select [YES], then press, ENTER., to select [YES] or [NO], then press ENTER., - error
View all Sony DAV-DX255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement. A.CAL MIC Calibration mic • Reflections from walls or the floor may affect measurements. • If an error message appears, follow the message, then select [YES]. An error message appears when: -the headphones are connected. -the calibration mic is not connected. -front speakers are not correctly connected. -surround speakers are not correctly connected. -front and surround speakers are not correctly connected. -there is excessive noise around the calibration mic. -the calibration mic is overloaded. 6 Press C/X/x/c to select [YES] or [NO], then press ENTER. x The measurement is OK. Disconnect the calibration mic, then select [YES]. The result is implemented. Measurement complete. FRONT L : YES FRONT R : YES CENTER : NONE SUBWOOFER : YES SURROUND L : NONE SURROUND R : NONE If OK, unplug calibration mic and select YES. YES NO 5 Press X/x to select [YES], then press ENTER. Calibration starts. Measuring. Please wait a moment. x The measurement is not OK. Follow the message, then select [YES] to retry. Measurement failure. Check speaker connection. Retry? YES NO Advanced Settings and Adjustments Note • Avoid being in the measurement area and making noise during the measurement (about 3 minutes), to avoid measurement failure. During the measurement, test signals are output from the speakers. Tip • You can check the distance between the listening position and each speaker. See page 75. Note • While the Auto Calibration function works: - do not turn off the power. - do not press any button. - do not change the volume. - do not change the function. continued 69GB