Sony DSC-P41 Operating Instructions - Page 100
PictBridge compliant printer, Memory Stick
View all Sony DSC-P41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Symptom You cannot format a "Memory Stick." You have formatted a "Memory Stick" by mistake. Cause Solution • The write-protect switch on the "Memory Stick" p Set it to the recording position (page 112). is set to the LOCK position. • All the data on the "Memory Stick" are erased by p We recommend that you set the "Memory Stick" write-protect formatting. You cannot restore them. switch to the LOCK position to protect accidental erasure (page 112). PictBridge compliant printer Symptom Cause Solution The connection cannot be established. • The printer is not compliant with the PictBridge standard. • The printer is not set for the connection with the camera. • [USB Connect] is not set to [PictBridge] on the Setup screen. • Depending on the circumstances, the connection may not be established. p Consult with the printer manufacturer. p Check that the printer is turned on and can connect with the camera. p Set it to [PictBridge] (page 110). p Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. You cannot print images. • The camera is not connected to the printer. • The printer is not turned on. • If you select [Exit] during printing, you may not print again depending on your printer. • Movies cannot be printed. • Images modified with a computer or images shot using other than this camera may not be able to be printed. p Check that the camera and the printer are properly connected using the USB cable. p Turn on the printer. For further information, refer to the operating instructions supplied with it. p Disconnect and connect the USB cable again. If you cannot print still, disconnect the USB cable, turn off and on the printer, then connect the USB cable again. - - Printing is canceled. • You disconnected the USB cable before the - (Not disconnect USB cable) mark disappears. 100