Sony DSC-P41 Operating Instructions - Page 98

Symptom You cannot cut a image. Cause • The movie is not long enough to cut. • Protected movies cannot be cut. • Still images cannot be cut. Solution - p Cancel the protection (page 64). - Computers Symptom You do not know whether or not your OS can be used with the camera. Cause - Solution p Check "Recommended computer environment" (pages 79, 90). You cannot install the USB driver. Your computer does not recognize your camera. - • The camera is turned off. • The battery level is too low. • You are not using the supplied USB cable. • The USB cable is not connected securely. • [USB Connect] is not set to [Normal] on the Setup screen. • The USB connectors on your computer are connected to other equipment besides the keyboard, the mouse. • The camera is not directly connected to your computer. • The USB driver is not installed. • Your computer does not properly recognize the device because you connected the camera and your computer with the USB cable before you installed the "USB Driver" from the supplied CD-ROM. p In Windows 2000, log on as Administrator (authorized Administrators) (page 79). p Turn on the camera (page 16). p Use the AC Adaptor (not supplied) (page 15). p Use the supplied USB cable (page 81). p Disconnect the USB cable, and securely connect it again. Make sure that "USB Mode" is displayed on the LCD screen (page 81). p Set it to [Normal] (page 110). p Disconnect the USB cables except for those connected to the keyboard and the mouse (page 79). p Directly connect the camera and your computer without using a USB hub (page 79). p Install the USB driver (page 80). p Delete the erroneously recognized device from your computer, then install the USB driver (pages 80, 83). 98