Sony DSCF717 Operating Instructions - Page 14
Using an external power source, Using your camera, abroad
UPC - 027242592889
View all Sony DSCF717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using an external power source Jack cover DC plug 1 AC power adaptor , Open the jack cover and connect the AC-L10A/L10B AC power adaptor (supplied) to the DC IN jack of your camera. Connect the plug with the v mark facing up. • Connect the AC power adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • Remove the battery pack when using an external power source. 2 To wall outlet (wall socket) Power cord (mains lead) 1 2 , Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (wall socket). • When you have finished using the AC power adaptor, disconnect it from the DC IN jack of the camera. • The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off. • To use power from an automobile, use the Sony Car Battery Adapter (not supplied). • If you insert or remove the DC plug while you are using the battery, the power may shut off. Using your camera abroad Power sources You can use your camera in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. AC-L10A/L10B • Do not use an electronic transformer (travel converter), as this may cause a malfunction. 14