Sony DSLR-A200W Instruction Manual - Page 152

Warning messages, Card error

Page 152 highlights

Warning messages If the following messages appear, follow the instructions. For "InfoLITHIUM" battery only • An incompatible battery pack is being used. Set date and time? • Set the date and time. If the message appears frequently, the internal backup battery is used up. Replace the battery (pages 25, 154). Power insufficient • You tried to perform [Cleaning mode] when the battery level is insufficient. Charge the battery pack or use the AC Adaptor/ charger (not supplied). No card • Insert a memory card. Unable to use card. Format? • The memory card was formatted on a computer and the file format was modified, or the memory card was formatted on another device. Select [OK], then format the memory card. You can use the memory card again, however, all previous data in the memory card is erased. It may take a some time to complete the format. If the message still appears, change the memory card. Card error • An incompatible memory card is inserted or the format was failed. Reinsert the card. • The inserted memory card cannot be used in your camera. • The memory card is damaged. • The terminal section of the memory card is dirty. Processing... • When Long exposure noise reduction will be done for the same amount of time that the shutter was open. You cannot do any further shooting during this reduction. Unable to display. • Images recorded with other cameras or images modified with a computer may not be able to be displayed. No lens attached. Shutter is locked. • The lens is not attached properly, or the lens is not attached. When attaching the camera to an astronomical telescope or something similar, set the recording mode to M. 152

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

152
Warning messages
If the following messages appear,
follow the instructions.
For “InfoLITHIUM” battery only
An incompatible battery pack is
being used.
Set date and time?
Set the date and time. If the
message appears frequently, the
internal backup battery is used
up. Replace the battery (pages
25, 154).
Power insufficient
You tried to perform [Cleaning
mode] when the battery level is
insufficient. Charge the battery
pack or use the AC Adaptor/
charger (not supplied).
No card
Insert a memory card.
Unable to use card. Format?
The memory card was formatted
on a computer and the file format
was modified, or the memory card
was formatted on another device.
Select [OK], then format the
memory card. You can use the
memory card again, however, all
previous data in the memory card
is erased. It may take a some time
to complete the format.
If the message still appears,
change the memory card.
Card error
An incompatible memory card is
inserted or the format was failed.
Reinsert the card.
The inserted memory card
cannot be used in your camera.
The memory card is damaged.
The terminal section of the
memory card is dirty.
Processing...
When Long exposure noise
reduction will be done for the
same amount of time that the
shutter was open. You cannot do
any further shooting during this
reduction.
Unable to display.
Images recorded with other
cameras or images modified with
a computer may not be able to be
displayed.
No lens attached. Shutter is
locked.
The lens is not attached properly,
or the lens is not attached. When
attaching the camera to an
astronomical telescope or
something similar, set the
recording mode to M.