Sony FWD-50PX3 Operating Instructions - Page 52

Recommendations on Installation Provide an ample amount of space around the display • To prevent internal heat buildup from sealing off the display, make sure to ensure proper ventilation by leaving open the minimum amount of space around the display, as illustrated below. • The ambient temperature must be 0 °C to 35 °C (32 °F to 95 °F). • When using the stand, make sure you use the applicable display stand SU-50FW (not supplied). • Regarding the installation of hardware such as brackets, screws, or bolts, we cannot specify the products. Actual installation is up to the authorized local dealers. Consult with qualified Sony personnel for installation. • While the display is on, a certain amount of heat builds up inside. This can cause burns. Avoid touching the top or rear of the display when it is powered on or just after it has entered standby mode. When using the display stand Front 20 (7 7/8) 10 10 (4) (4) Side 10 (4) When mounting the display horizontally Front 25 (9 7/8) 10 10 (4) (4) Side 25 (9 7/8) 5 (2) Units: cm (inches) When mounting the display vertically Front 20 (7 7/8) 25 (9 7/8) Side 25 (9 7/8) Make sure that the 1 POWER switch is at the lower right. 10 (4) 5 (2) Units: cm (inches) Note When moving or installing the display when it is attached to the stand (not supplied), do so with at least 3 people. 6 GB Units: cm (inches) Notes • When mounting the display vertically, you cannot use the speakers SS-SP50FW (not supplied). • Be sure to use only the UL listed wall mount bracket to mount the display.