Sony FWD-50PX3 Operating Instructions - Page 74
Setup Settings, Language, Timer Setting, ECO Mode, Status Display, Speaker Out
UPC - 027242722484
View all Sony FWD-50PX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Setup Settings To highlight an option and to change settings, press F/f/G/g. Press to confirm the selection. The "Setup" settings include the following options: Language Timer Setting ECO Mode Status Display Speaker Out Select to display all on-screen settings in your language of choice: "English", "Français", "Deutsch", "Español", "Italiano" or " ". You can adjust time, display the built-in clock, or set the timer to make the display power on/off at a predetermined time. "Clock Set": Sets the day of the week and the hour of the day. "Clock Display": Displays the currently set time on the screen when set to "On". "On/Off Timer": Sets the time at which the power is automatically turned on or off. Note If the built-in clock tends to lose time, the internal battery may be exhausted. Please contact your authorized Sony dealer to have the battery replaced. "Off": Select to view picture without the benefit of power saving. "Low"/"High": Select to change brightness and reduce power consumption. "On" makes input signal and "Aspect" information appear on the screen for about 20 seconds when the display is turned on, and the input signal information appear for about 5 seconds when the input signal is switched, while "Off" disables display of status information. Tip You can display the input signal and "Aspect" information by using DISPLAY on the remote control regardless of the "Status Display" setting. "On": Enables sound to be emitted from the speakers. "Off": Disables sound to be emitted from the speakers. Note When "Speaker Out" is set to "Off", "Sound Mode" and "Sound Mode Adjust." cannot be selected. 28 GB