Sony FWD-50PX3 Operating Instructions - Page 53
Location and Function of Parts and Controls, Front Panel - speakers
UPC - 027242722484
View all Sony FWD-50PX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Location and Function of Parts and Controls Front Panel GB 1 INPUT button Press to select a signal to be input from the INPUT or OPTION connector. The signal to be input switches as follows each time you press the INPUT button. When an optional adaptor supporting the video signal is not installed in the OPTION slot, OPTION will be skipped. 2 MENU (page 19) 34 f/F (volume/cursor) button Press to control speaker volume. When the menu is displayed, press to move the cursor (yellow) or set a value. 5 ENTER button Press to set your choice. 61 Switches the display on or off (standby). Note To protect the panel, a certain amount of time is required to turn the display to on/off (standby). When you turn the display on again, soon after turning it off, wait about 8 seconds before you turn it on again. 7 Remote control sensor 8 POWER/STANDBY indicator • Lights up in green when the display is switched on. • Lights up in red when the display is in standby mode. Lights up in orange when the display enters the power saving mode while a signal is input from a PC. When the POWER/STANDBY indicator blinks, see page 37. Note When the "LED" option in the "Multi Display" settings is set to "Off" and the "Position" option is not set to the right-bottom, the indicator does not light up in green even when the display is turned on, except for the case of no signal or an unsupported signal. 7 GB