Sony HCD-ZX70DVD Operating Instructions - Page 59

Listening to the radio

Page 59 highlights

The Radio To erase a preset station 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 3 Move the multi stick toward B or b repeatedly to select "TUNER Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward B or b repeatedly to select "TUNER Erase ?", then press PUSH ENTER. 5 Move the multi stick toward B or b repeatedly to select the preset number you want to erase, then press PUSH ENTER. Select "TUNER Ers FM ALL" (or "TUNER Ers AM ALL") when you want to erase all the preset stations. When you erase a preset number, the preset number decreases by one and all preset numbers following the erased one are renumbered. Tip The preset stations are retained for half a day even if you unplug the power cord or a power failure occurs. To change the AM tuning interval (Except for Middle Eastern and European models) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To switch the AM tuning interval, tune in any AM station first, then turn off the power. While holding down MODE SELECT, turn the power back on. When you switch the interval, AM preset stations are erased. To switch back to the original interval, repeat the same procedure. Listening to the radio - Preset Tuning Preset radio stations in the tuner's memory first (see "Presetting radio stations" on page 58). ?/1 (Power) N nN nN X .>m M x cCt T O V B b v Numeric buttons >10 TUNER BAND ./> VOL +/- continued 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

59
The Radio
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 58).
continued
To erase a preset station
1
Press TUNER/BAND repeatedly to select FM
or AM.
2
Press MODE SELECT repeatedly to select
“Set Up Mode”, then press PUSH ENTER.
3
Move the multi stick toward
B
or
b
repeatedly
to select “TUNER Set Up ?”, then press PUSH
ENTER.
4
Move the multi stick toward
B
or
b
repeatedly
to select “TUNER Erase ?”, then press PUSH
ENTER.
5
Move the multi stick toward
B
or
b
repeatedly
to select the preset number you want to erase,
then press PUSH ENTER.
Select “TUNER Ers FM ALL” (or “TUNER
Ers AM ALL”) when you want to erase all the
preset stations.
When you erase a preset number, the preset
number decreases by one and all preset numbers
following the erased one are renumbered.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or a power failure occurs.
To change the AM tuning
interval
(Except for Middle Eastern and
European models)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down MODE SELECT,
turn the power back on. When you switch the
interval, AM preset stations are erased. To switch
back to the original interval, repeat the same
procedure.
Numeric buttons
?/1
(Power)
x
M
m
>
.
nN
X
nN
N
T
t
C
c
O
TUNER BAND
VOL +/–
V
v
b
B
./>
>10