Sony HCD-ZX70DVD Operating Instructions - Page 68
Recording from a tape
View all Sony HCD-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Recording from a tape - High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 2 ?/1 (Power) 3 Multi stick x PUSH ENTER 2 Press HI-DUB. Deck B stands by for recording. 3 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 4 Move the multi stick toward B or b repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 5 Move the multi stick toward B or b repeatedly to select "Direction Set Up ?", then press PUSH ENTER. 6 Move the multi stick toward B or b repeatedly to select "1 Way" to record on one side, or "Cycle" (or "Relay") to record on both sides, then press PUSH ENTER. 7 Press REC PAUSE/START. Dubbing starts. 71 1 Press A A and A B and insert a recorded tape into deck A and a recordable tape into deck B. Insert with the side you want to play/record facing forward. To stop dubbing Press x. To cancel the menu operation Press MODE SELECT. Tips • When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side. • If you select "Cycle" in the "Direction Set Up ?" menu when the tapes you use have different lengths, the tape in each deck reverses independently. If you select "Relay", the tapes in both decks reverse together. • You don't have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. 68