Sony HCD-ZX70DVD Operating Instructions - Page 60
Listening to the radio, continued, Press TUNER/BAND repeatedly to, select FM or AM., Press
View all Sony HCD-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Listening to the radio (continued) 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press . or > repeatedly or use the numeric buttons to tune in the desired preset station. When you directly tune in a preset number over 10, press >10 first, then press the corresponding number buttons. (e.g. To select 20, press >10, 2, and then 10/0.) 10/0 is the button to input 10 or 0. Preset number* STEREO Frequency * When only one station is preset, "ONE PRESET" appears in the display. To Do this Turn off the radio Press ?/1. Adjust the volume Press VOL +/-. To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press m or M repeatedly. For automatic tuning, press and hold m or M. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, do the following procedure: 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press ENTER. 2 Press B or b repeatedly to select "TUNER Set Up ?", then press ENTER. 3 Press B or b repeatedly to select "Stereo Mono ?", then press ENTER. 4 Press B or b repeatedly to select "Mono", then press ENTER. "Mono" appears in the display. There will be no stereo effect, but the reception will improve. To restore the stereo effect, repeat steps 1 through 4 and select "Stereo" in step 4. • To improve broadcast reception, reorient the respective antenna. Notes • When the TUNER function is selected, there is no display on the TV screen. • When DVD is selected as the current function and TUNER/BAND is pressed to select the TUNER function, some time may be necessary before the function can be switched. • When you change the function from DVD to TUNER, "WAIT!" may appear on the front panel display. While this appears, there is no audio output. 60