Sony HCD-ZX70DVD Operating Instructions - Page 67
select Set Up Mode, then press PUSH, Press MODE SELECT repeatedly
View all Sony HCD-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
The Tape deck 2 Press one of the A 1~5 buttons and place a disc on the disc tray. Press the same button to close the disc tray. If the indicator for the tray you want to record is not lit, press D.SKIP on the remote repeatedly until it lights. Place with the label side up. When you play an 8 cm disc, place it on the inner circle of the tray. 3 Press FUNCTION repeatedly until "DVD" appears. 4 Press CD SYNC. Deck B stands by for recording and the disc player stands by for playback. The TAPE B N indicator (for the front side) lights and the REC PAUSE/START button flashes. 5 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 6 Move the multi stick toward B or b repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 7 Move the multi stick toward B or b repeatedly to select "Direction Set Up ?", then press PUSH ENTER. 8 Move the multi stick toward B or b repeatedly to select "1 Way" to record on one side, or "Cycle" (or "Relay") to record on both sides, then press PUSH ENTER. 9 Press REC PAUSE/START. Recording starts. To stop recording Press x. To cancel the menu operation Press MODE SELECT. Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low-level high-frequency signals, do the following procedure after pressing CD SYNC. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward B or b repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward B or b repeatedly to select "DOLBY NR Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward B or b repeatedly to select "On", then press PUSH ENTER. "DOLBY NR" appears in the display. To return to the original setting, repeat steps 1 through 4 and select "Off" in step 4. Notes • You cannot listen to other sources while recording. • CD Synchro Recording is not available with DVDs. 67