Sony HCD-ZX70DVD Operating Instructions - Page 70
Recording a disc by specifying the order
View all Sony HCD-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Recording on a tape manually (continued) Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing REC PAUSE/START in step 3. • To record non-preset stations, use m and M in step 2 to tune in the desired station manually. • When you want to reduce the hiss noise in low-level high-frequency signals, do the following procedure after pressing REC PAUSE/START in step 3. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward B or b repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward B or b repeatedly to select "DOLBY NR Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward B or b repeatedly to select "On", then press PUSH ENTER. "DOLBY NR" appears in the display. To return to the original setting, repeat steps 1 through 4 and select "Off" in step 4. • When recording from a disc, you can use . or > to select titles, chapters, or tracks during rec pause mode (after pressing REC PAUSE/START in step 3 and before pressing again in step 8). • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Recording a disc by specifying the order - Program Edit You can record titles, chapters, and tracks from all the discs in the order you want. ?/1 (Power) 16 11 11 2 3,13 V/v N nN nN X .>m M x cCt T O V B b v Numeric buttons DVD NX x ENTER B/b 70