Sony HCD-ZX70DVD Operating Instructions - Page 94
Tape Deck, Tuner
View all Sony HCD-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Troubleshooting (continued) The angles cannot be changed when you play a DVD. • Multi-angles are not recorded on the DVD. • Change the angles when "ANGLE" appears on the front panel display (page 50). • Changing the angles is prohibited on the DVD. Tuner Severe hum or noise ("TUNED" or "STEREO" flashes in the display). • Adjust the antenna. • The signal strength is too weak. Connect the external antenna. A stereo FM program cannot be received in stereo. • Select "Stereo" in the "Stereo Mono ?" menu. Tape Deck The tape does not record. • No tape in the cassette holder. • The tab has been removed from the cassette (see "To save a tape permanently" on page 90). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level. • The heads are dirty. Clean them (see "Cleaning the tape heads" on page 91). • The record/playback heads are magnetized. Demagnetize them (see "Demagnetizing the tape heads" on page 91). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (see "Demagnetizing the tape heads" on page 91). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (see "Cleaning the tape heads" on page 91). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized. Demagnetize them (see "Demagnetizing the tape heads" on page 91). After pressing N (n) or A, there is a mechanical noise, "EJECT" appears in the display, and the unit enters standby mode automatically. • The cassette tape was not inserted correctly. Eject the tape and turn the power back on. If other troubles not described above occur, reset the system as follows: 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press x, DISPLAY, and DISC 5 at the same time. 4 Press ?/1 to turn on the power. The system is reset to the factory settings except for DVD settings. All the settings other than DVD settings you made, such as the preset stations, clock, and timer are cleared. You should set them again. 94