Sony HDR TG1 Operating Guide - Page 9

Getting Started b Notes • You cannot charge the battery pack while the QUICK ON lamp is flashing. When the QUICK ON lamp is flashing, press POWER to turn off your camcorder. Make sure the QUICK ON lamp is not flashing before charging the battery pack. To remove the battery pack Turn off your camcorder and open the battery/Memory Stick Duo cover. Slide the battery eject lever. Be sure not to drop the battery pack. Battery eject lever b Notes • When you remove the battery pack or disconnect the AC Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p. 11)/ access lamp (p. 13)/QUICK ON lamp are turned off. To charge the battery pack using only the AC Adaptor Close the LCD panel with your camcorder turns off, then connect the AC Adaptor to the DC IN jack on your camcorder. DC IN jack Open the jack cover. DC plug With the v mark on the bottom Available running time for the supplied battery pack Charging time: Approximate time (min.) required when you fully charge a completely exhausted battery pack. Recording/Playback time: Approximate time (min.) available when you use a fully charged battery pack. "HD" stands for high definition image quality, and "SD" stands for standard image quality. (Unit:min.) HD SD Charging time 135 Recording time*1*2 Continuous recording time 95 120 Typical recording time*3 Playback time*2 45 60 130 145 *1 [REC MODE]: SP *2 When the LCD backlight is on. *3 Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. US 9