Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 104
Video performance, Processor adjustment range, Input connectors, Digital signal inputs
![]() |
View all Sony HVR1500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
When controlling from DSRM-10 Remote Control Unit: DV/DVCAM/DVCPRO: Jog mode: 0 (still) to 2 times normal speed in both directions Shuttle mode: 0 (still) to 16 times normal speed in both directions HDV 1080i: Jog mode: 0 (still) to 1 times normal speed Shuttle mode: 0 (still) to 24 times normal speed in both directions Video performance Band width (525/59.94) Composite/S-video: 30 Hz to 4.2 MHz ±1.0 dB (Y) Component: 30 Hz to 5.0 MHz ±1.0 dB (Y) 30 Hz to 1.5 MHz +1.0/-5.0 dB (R- Y/B-Y) Band width (625/50) Composite/S-video: 25 Hz to 4.8 MHz ±1.0 dB (Y) Component : 25 Hz to 5.0 MHz ±1.0 dB (Y) 25 Hz to 2.0 MHz +1.0/-2.0 dB (R- Y/B-Y) S/N Composite/S-video I/O (Y): 52 dB or more Component I/O (Y): 54.5 dB or more Y/C delay 30 ns or less K-factor 2.0% or less (K2T, KPB) Processor adjustment range Video level 1) ±3 dB/ -∞ to 3 dB selectable Chroma level 1) ±3 dB/ -∞ to 3 dB selectable Setup/Black level 1) ±30 IRE (±210 mV) Chroma phase 1) ±30° System phase 1) Sync: ±1μs SC: ±180° 1) Adjust with menu settings. Audio performance Frequency response Two-channel (48 kHz) mode: 20 Hz to 20 kHz ±1.0 dB Four-channel (32 kHz) mode: 20 Hz to 14.5 kHz ±1.0 dB Dynamic range More than 87 dB Distortion (THD + N) Less than 0.07% (48 kHz) Input connectors Digital signal inputs SD/HD SDI IN BNC type (1), Serial digital (270 Mbps), SMPTE 259M/ITU-R BT.656 HD-SDI format, SMPTE 292M compliant AUDIO I/O (AES/EBU) IN BNC type (2), AES-3id-1995 Compliant HDV/DV 6-pin IEEE 1394 connector, S100 (1) Analog video inputs REF. VIDEO IN BNC type (2, loop-through with 75 Ω automatic terminator) Black burst or Composite sync 0.286 Vp-p (525/60) or 0.3Vp-p (625/ 50), 75 Ω, negative sync or HD bipolar tri-level sync 0.6Vp-p, 75 Ω, negative sync VIDEO IN (optional HVBK-1505 Analog Input Board required) BNC type (4, loop-through with 75 Ω automatic terminator), composite/ component (SD)/S-video switchable Composite Y/S-Y/CPST and 1 loop-through with 75 Ω automatic terminator: 1.0 Vp-p, 75 Ω, negative sync Component (SD) Y/S-Y/CPST: 1.0 Vp-p, 75 Ω, negative sync R-Y/S-C and B-Y: 0.7 Vp-p (75% color bars for 525/59.94 or 100% color bars for 625/50), 75 Ω S-video Y/S-Y/CPST: 1.0 Vp-p, 75 Ω, negative sync R-Y/S-C: 0.286 Vp-p (525/59.94) or 0.3 Vp-p (625/50), 75 Ω (burst level) Analog audio inputs AUDIO IN (optional HVBK-1505 Analog Input Board required) XLR 3-pin, female (2), +4/0/-3 1)/ -6 dBm, high impedance, balanced 1) For 625/50 only Timecode input TC IN BNC type (1), SMPTE timecode (525/ 59.94) or EBU timecode (625/50), 0.5 Vp-p to 18 Vp-p, 3.3 kΩ, unbalanced Output connectors Digital signal outputs SDI OUT BNC type (2) Serial digital (270 Mbps), SMPTE 259M/ ITU-R BT.656 HD SDI OUT BNC type (2) Appendix 104 Specifications
![](/manual_guide/products/sony-hvr1500a-product-manual-hve1500a-operating-manuals-a652de3/104.png)