Sony HVR1500A Product Manual (HVE-1500A Operating Manuals) - Page 82
C Phase Mode [>> C Phas, U/v Composite [>>> Cmpst]
View all Sony HVR1500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
VIDEO CONTROL [Video]: Settings related to video control Description of settings SETUP ADD [> Setup add]: Determine whether or not to add *OFF [>> OFF]: Do not add black setup. black setup to analog video output signals. ON (ADD) [>> ON]: Add black setup. Note Displayed only when the system frequency is set to 60i. CC(F1) BLANK [> CC1 blank]: Select whether to suppress the closed caption signal to be superimposed on the 1st field of the output video signal. *OFF [>> OFF]: Do not suppress. ON [>> ON]: Suppress. Note Displayed only when the system frequency is set to 60i. CC(F2) BLANK [> CC2 blank]: Select whether to suppress the closed caption signal to be superimposed on the 2nd field of the output video signal. *OFF [>> OFF]: Do not suppress. ON [>> ON]: Suppress. Note Displayed only when the system frequency is set to 60i. WIDE MODE [> Wide mode]: Specify whether to add widescreen aspect ratio information to signals recorded or played back. *AUTO [>> Auto]: Automatically add wide-screen aspect ratio information when it is detected from the input video signal currently selected or the tape currently being played back. OFF [>> OFF]: Ignore wide-screen aspect ratio information. ON [>> ON]: Always add wide-screen aspect ratio information. ESR MODE [> ESR mode]: Select whether to enable the edge subcarrier reducer (ESR). *OFF [>> OFF]: Do not enable. ON [>> ON]: Enable. When playing back a composite signal, set this to ON. SD PROCESS CONTROL [> SD Process] C PHASE MODE [>> C Phas *U/V (COMPOSITE) [>>> Cmpst]: Select this setting when MD]: Select the phase observing the composite video output level using a rotation mode for chroma composite signal vectorscope. phase control. PB/PR (COMPONENT) [>>> Cmpnt]: Select this setting when The effect of this setting observing the component video output level using a applies to the output component signal vectorscope. levels of all of the composite video, S-video, SDI and component video signals. ADJ RANGE [>> Adj range]: *-3 to +3 (dB) [>>> -3/+3]: -3 dB to +3 dB Select the adjustment WIDE [>>> wide]: -∞ to +3 dB range of the VIDEO and CHROMA gains. VIDEO GAIN [>> V gain]: Set the video output level. 000 [>>> 000] to 3FF [>>> 3FF] Factory default setting: *200H CHROMA GAIN [>> C gain]: 000 [>>> 000] to 3FF [>>> 3FF] Set the chroma output Factory default setting: *200H level. CHROMA PHASE [>> C 00 [>>> 00] to FF [>>> FF] phase]: Set the chroma Factory default setting: *80H phase. SETUP LEVEL [>> Setup 000 [>>> 000] to 3FF [>>> 3FF] lev]: Set the black setup Factory default setting: *200H level. Chapter 7 Menus 82 Menu Contents