Sony MV-65ST Operating Instructions - Page 35
Troubleshooting, General, Disc playback, Picture, Operation - problems
View all Sony MV-65ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Troubleshooting The following checklist will help you remedy problems you may encounter with the player. Before going through the checklist below, check the connection and operating procedures. General This player does not turn on. •Check that the AC power adaptor or the power cord for the cigar lighter socket is connected correctly. •If the power cord for the cigar lighter socket is used, check the fuse. t If the fuse is blown, replace it with a correctly rated fuse. t If the fuse blows again, consult your nearest Sony dealer. •The player may be overheated. t Make sure that the player is turned off. Wait until the player cools off, then press (POWER) again. Disc playback A disc cannot be loaded. •Another disc is already loaded. •The disc is forcibly inserted upside down or in the wrong way. MP3 files cannot be played back. •Recording was not performed according to the ISO 9660 level 1 or level 2 format, or the Joliet convention in the expansion format. •The file extension ".MP3" is not added to the file name. •Files are not stored in MP3 format. MP3 files take longer to play back than others. The following discs take a longer time to start playback. - a disc recorded with a complicated tree structure. - a disc to which data can be added. Playback functions such as pause are deactivated. •The RESET button has been pressed. •The disc is ejected. The sound skips. •Dirty or defective disc. •The player is installed in the place subject to severe vibrations. Picture There is no picture. •Color system setting has been changed manually while playing a DVD. t Change the setting according to the color system of the DVD, turn off the player and turn it on again, or switch the input channel to "VIDEO," then switch it to "DVD." •Check that the device connected to the AUDIO/VIDEO INPUT connectors is connected correctly. •If there is no picture on the TV screen, etc. connected to the player, check that the device connected to the AUDIO/VIDEO OUTPUT connectors is connected correctly. Picture noise appears. •Dirty or defective disc. •The player is installed in the place subject to severe vibrations. Operation The card remote commander does not function. •Remove any obstacles between the card remote commander and this player. •Use the card remote commander closer to the remote control sensor. •Point the light emitter of the commander at the remote control sensor of the player. •Replace the battery in the remote if it is weak. The player does not play from the beginning when playing a disc. •Resume Playback may be activated. t Press x again or eject the disc. •Depending on the DVD, a title menu or a DVD menu may automatically appear on the monitor during playback. t Select the desired menu (page 18). •Depending on the Video CD, the PBC menu display automatically appears on the monitor during playback. t Select the desired menu (page 20). continue to next page t 35