Sony PEG-NX73V Read This First Operating Instructions - Page 14
Press lightly on the screen with the stylus., Following the on-screen instructions, tap exactly in
View all Sony PEG-NX73V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Notes • Always use the pointed end of the stylus for tapping or making strokes on your CLIÉ handheld screen. Never use a writing pen, pencil, or other sharp object to write on the screen. • When you put the stylus back in its holder, push it in until it clicks into place. 3 Press lightly on the screen with the stylus. This action is called "tapping." The Setup screen for digitizer calibration is displayed. b Press lightly on the screen (Tap) 4 Following the on-screen instructions, tap exactly in the center of the displayed mark. Tap the next targets, which are displayed at the bottom right and then in the center of the screen. Note If the digitizer is not configured correctly, the scroll bar may not operate properly, "tapping" may not work as expected, or other problems may occur. b For details on reconfiguring the digitizer, refer to "Customizing your CLIÉ™ handheld (Preferences): Adjusting the Digitizer" in the "Handbook." After calibration is complete, a screen for setting the time and date is displayed. 14